User Guide

• One-of-a-kind carbon fiber cosmetic finish forms the unique racing theme.

• Limited production of the amplifier ensures it as a collector's item for years to come.

• Large capacitor bank built-in on the rail voltage to allow for unmatched internal voltage stiffing

during demanding musical dynamics.

• Built-in Basscube allows 15 dB of parametric boost and subsonic filter for low pass section of

the amplifier.

• TCCH™ Thermal Convection Cooled Heatsink. This proprietary design uses two variable speed

fans to ensure that the Octane keeps its cool when the music gets hot!

• High-current Triple Darlington output stage. This tried and true topology is the standard for

outstanding dynamic peak output performance.

• TAIM™ Timed Acoustically Integrated Muting. Insures dead silent turn on & off, no clicks, pops

or buzzes.

• 24dB per octave, high pass and low pass crossover. Continuously variable from 40Hz to 800Hz.

• Twin-T™ bass boost circuit provides up to 18dB of boost at 45Hz.

• Superbrite™ Tri-LED power-on indicator.

• Optional LPL44™ Low Pass Level controller allows the driver to adjust bass volume from the

driver's seat.

• Optional RDDP™ Remote Diagnostic Display Panel allows the driver to monitor the amplifier's

battery voltage, power-on, thermal and overload status with use of the SDT™ or RDDP™ kit.

PAGE 1
• One-of-a-kind carbon fiber cosmetic finish forms the unique racing theme. • Limited production of the amplifier ensures it as a collector's item for years to come. • Large capacitor bank built-in on the rail voltage to allow for unmatched internal voltage stiffing during demanding musical dynamics. • Built-in Basscube allows 15 dB of parametric boost and subsonic filter for low pass section of the amplifier. • TCCH™ Thermal Convection Cooled Heatsink.
PAGE 2
INPUTS Connect preamp signal cables from the headunit to these terminals. To maximize noise rejection, we recommend using Phoenix Gold ZEROpoint Musical Reference, ZEROpoint Pro, ZEROpoint QLX, ZEROpoint TRX, XS560 or XS460 series twisted pair interconnects. CROSSOVER FREQUENCY Controls the high and low pass crossover point symetrically for the high and low pass speaker outputs. The crossover is always engaged with a frequency adjustable from 40Hz to 800Hz with a 24dB per octave slope.
PAGE 3
Continuous Output Power at 1% THD (watts): Into 4 ohms Stereo @ 12.5 Vdc (IASCA/USAC) . . . . .37 x 4 Into 4 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . .100 x 4 Into 2 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . .200 x 4 Into 4 ohms Bridged @ 14.4 Vdc . . . . . . . . . . . . . .400 x 2 Minimum Speaker Load, Bridged . . . . . . . . . . . . . .2 ohms Minimum Speaker Load, Stereo . . . . . . . . . . . . . . . .1 ohm Chassis Dimensions . . . . . . . . . .13.00L x 29.00W x 2.