User Manual

LOW PASS FILTER (LPF)

Sets low pass crossover frequency. Continuously variable from 50Hz to 250Hz

SUBSONIC

Continuously variable lter from 10Hz-55Hz to remove low inaudible frequencies to

increase system efciency and protect speakers.

BOOST

Controls the bass boost from 0 to +18dB

REMOTE LEVEL CONTROL

This port is for connecting the remote subwoofer level control knob. This allows up to

20dB of volume adjustment. This is not a bass boost, it controls the level of the low pass

signal.

INPUTS

If you are using RCA or high level signal from an aftermarket head unit, select UNBAL. If

you are using high level from a OEM factory source unit or factory amplier select BAL.

INPUT

Connect preamp signal cables (RCA) from the source unit to these terminals.

OUTPUT

Used to connect to a secondary amplier without degrading signal strength.

5 6

7 9

10 11 12