User Manual

ManualsBrandsPhoenix Gold ManualsCar AudioGX 12" Dual-Voice-Coil 2-Ohm Subwoofer - Black

Dual Cone Design- to strengthen the rigidity of the woofer’s cone body

to minimize the distortion while increasing the handling of high pressure

produced in the subwoofer enclosure

CFL³ Voice Coil- 3x more structurally rigid, prolonging the life of voice coil

Magnetic FEA High Efciency Motor- provides highest possible, efcient

motor design

Vented Frame & Motor- provides better thermal efciency, reduces motor

compression and extended low frequency response

MLB Collar- enables micro level bonding with cone & spider for increased

strength

Dual Twisted Sleeved Leads- reduces wire roping and allows high excursion,

increased exibility and long life

BEEF’ed Up- Bent Edge Enhanced Frame- minimizes overall resonance and

provides accurate sound with less distortion

FEATURES

Models: GX12 - GX10 - GX8

GX Series Subwoofers

Summary of content (8 pages)

PAGE 1
GX Series Subwoofers Models: GX12 - GX10 - GX8 FEATURES Dual Cone Design- to strengthen the rigidity of the woofer’s cone body to minimize the distortion while increasing the handling of high pressure produced in the subwoofer enclosure CFL³ Voice Coil- 3x more structurally rigid, prolonging the life of voice coil Magnetic FEA High Efficiency Motor- provides highest possible, efficient motor design GX Vented Frame & Motor- provides better thermal efficiency, reduces motor compression and extended low freq
PAGE 2
GX12D2 / GX12D4 GX12D2 GX12D4 Nominal Impedance (Z) 1.85 ohms 3.50 ohms DC Resistance (Re) 3.70 ohms 7.00 ohms Resonance Frequency (Fs) 21.23 Hz 21.80 Hz Piston Area (Sd) 0.0499 m2 0.0499 m2 Force Factor (BL) 17.35 Tm 20.77 Tm Mechanical Q Factor (Qms) 3.63 3.25 Electrical Q Factor (Qes) 0.30 0.34 Total Q Factor (Qts) 0.27 0.31 Sensitivity 1W/M (SPL) Mechanical Compliance (Cms) Moving Mass (Mms) Linear Excursion (Xmax) 87.44 dB 87.72 dB 0.31 mm/N 0.35 mm/N 180.89 g 152.
PAGE 3
24.00” x 14.00” x 14.12” Material Thickness 0.75” Net Internal Volume 1.75 cu ft Tuning Frequency Port Inlet: 1.50”W x 12.50”H 37Hz 18.75 inch2 Port Area Port Inlet (WxH) 24. 00 1.50” x 12.50” Port Length Detail 14.00 in Box External Dimensions Size Quantity Top/Bottom 24.00” x 14.12” 2 Front 21.75” x 12.50” 1 Rear 24.00” x 12.50” 1 Left 12.63” x 12.50” 1 Right 13.37” x 12.50” 1 Port 1 11.13” x 12.50” 1 Port 2 3.30” x 12.50” 1 P1 13.
PAGE 4
GX10D2 / GX10D4 GX10D2 GX10D4 Nominal Impedance (Z) 1.85 ohms 3.50 ohms DC Resistance (Re) 3.70 ohms 7.00 ohms Resonance Frequency (Fs) 24.87 Hz 27.53 Hz Piston Area (Sd) 0.0314 m2 0.0314 m2 Force Factor (BL) 16.97 Tm 21.04 Tm Mechanical Q Factor (Qms) 3.71 3.47 Electrical Q Factor (Qes) 0.26 0.30 Total Q Factor (Qts) 0.24 0.27 Sensitivity 1W/M (SPL) Mechanical Compliance (Cms) Moving Mass (Mms) Linear Excursion (Xmax) Volume Acoustic Compliance (Vas) Reference Efficiency (NO.
PAGE 5
13.83 in Slot Ported Enclosure 20.00” x 12.00” x 13.83” Material Thickness 0.75” Net Internal Volume 1.00 cu ft Tuning Frequency Port Inlet: 1.50”W x 10.50”H 37Hz 15.75 inch2 Port Area Port Inlet (WxH) 20. 1.50” x 10.50” Port Length Detail 12.00 in Box External Dimensions 00 26.16” Size Quantity Top/Bottom 20.00” x 13.83” 2 Front 17.75” x 10.50” 1 Rear 20.00” x 10.50” 1 Left 12.33” x 10.50” 1 Right 13.08” x 10.50” 1 Port 1 10.83” x 10.50” 1 Port 2 12.33” x 10.
PAGE 6
GX8D2 / GX8D4 GX8D2 GX8D4 Nominal Impedance (Z) 1.85 ohms 3.50 ohms DC Resistance (Re) 3.70 ohms 7.00 ohms Resonance Frequency (Fs) 31.88 Hz 32.37 Hz Piston Area (Sd) 2 0.0206 m 0.0206 m2 Force Factor (BL) 13.83 Tm 17.40 Tm Mechanical Q Factor (Qms) 4.01 3.68 Electrical Q Factor (Qes) 0.32 0.35 Total Q Factor (Qts) 0.30 0.32 Sensitivity 1W/M (SPL) Mechanical Compliance (Cms) Moving Mass (Mms) Linear Excursion (Xmax) Volume Acoustic Compliance (Vas) Reference Efficiency (NO.
PAGE 7
11.26 in Slot Ported Enclosure 21.25” x 11.00” x 11.26” Material Thickness 0.75” Net Internal Volume .50 cu ft Tuning Frequency Port Inlet: 1.50”W x 9.50”H 45Hz Port Area 14.25 inch2 Port Inlet (WxH) 1.5” x 9.50” Port Length Detail 11.00 in Box External Dimensions 21. 25 34.01” Size Quantity Top/Bottom 21.25” x 11.26” 2 Front 19.00” x 9.50” 1 Rear 21.25” x 9.50” 1 Left 9.76” x 9.50” 1 Right 10.51” x 9.50” 1 Port 1 8.26” x 9.50” 1 Port 2 16.00” x 9.50” 1 Port 3 4.
PAGE 8
SINGLE SUBWOOFER SYSTEM SINGLE SUBWOOFER SYSTEM GX12D2 / GX10D2 / GX8D2 = 1 OHM GX12D4 / GX10D4 / GX8D4 = 2 OHM GX12D2 / GX10D2 / GX8D2 = 4 OHM GX12D4 / GX10D4 / GX8D4 = 8 OHM DUAL SUBWOOFER SYSTEM DUAL SUBWOOFER SYSTEM GX12D2 / GX10D2 / GX8D2 = 1/2 OHM GX12D4 / GX10D4 / GX8D4 = 1 OHM GX12D2 / GX10D2 / GX8D2 = 2 OHM GX12D4 / GX10D4 / GX8D4 = 4 OHM WIRED IN PARALLEL WIRED IN PARALLEL WIRED IN SERIES WIRED IN SERIES - PARALLEL Phoenix Gold Product Warranty LIMITED WARRANTY ON SUBWOOFERS Phoenix Go