Datasheet

ManualsBrandsPhoenix Contact ManualsConnectorsTerminal block, 0.14...1.5 mm² 400 VAC/VDC 10 A Blue

https://www.phoenixcontact.com/hq/products/3210302

01/25/2017Page1/20

Knife disconnect terminal block-PT 1,5/S-MT BU-3210302

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Knife disconnect terminal block, Connection type:Push-in connection, Cross section: 0.14 mm²-1.5 mm²,

AWG:26-14, Nominal current:10 A, Nominal voltage:400 V, Length:58.9 mm, Width:3.5 mm, Color:blue,

Assembly:NS 35/7,5, NS 35/15

Why buy this product

The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free

wiring of conductors with ferrules or solid conductors

The compact design and front connection enable wiring in a confined space

In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection

Convenient separation of circuits, thanks to lever-type disconnect knife

Key Commercial Data

Packing unit 50 STK

GTIN

GTIN 4046356904711

Custom tariff number 85369010

Note Made to Order (non-returnable)

Technical data

General

Number of levels 1

Number of connections 2

Potentials 1

Nominal cross section 1.5 mm²

Color blue

Insulating material PA

Flammability rating according to UL 94 V0

Degree of pollution 3

Overvoltage category III

Insulating material group I

Summary of content (20 pages)

PAGE 1
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Knife disconnect terminal block, Connection type: Push-in connection, Cross section: 0.14 mm² - 1.
PAGE 2
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Technical data General Maximum load current 10 A Nominal current IN 10 A Nominal voltage UN 400 V Open side panel Yes Relative insulation material temperature index (Elec.
PAGE 3
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Technical data Connection data Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1 mm² Stripping length 8 mm ... 10 mm Internal cylindrical gage A1 / B1 Standards and Regulations Connection in acc.
PAGE 4
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Classifications UNSPSC UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / CSA / LR / DNV GL / cULus Recognized Ex Approvals Approval details UL Recognized  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.
PAGE 5
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Approvals DNV GL cULus Recognized https://www.dnvgl.com/  1481515 HH http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm Accessories Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.
PAGE 6
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.
PAGE 7
https://www.phoenixcontact.
PAGE 8
https://www.phoenixcontact.
PAGE 9
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Accessories Mounting material - PT-IL - 3208090 Operating decal for the push-in Technology End block End clamp - E/UK - 1201442 End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.
PAGE 10
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Accessories End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray End cover End cover - D-PT 1,5/S-MT-0,8 - 3210303 End cover, Length: 58.7 mm, Width: 0.8 mm, Height: 24.3 mm, Color: gray End cover - D-PT 1,5/S-MT-0,8 OG - 3210304 End cover, Length: 58.7 mm, Width: 0.8 mm, Height: 24.
PAGE 11
https://www.phoenixcontact.
PAGE 12
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Accessories Plug-in bridge - FBS 2-3,5 - 3213014 Plug-in bridge, Pitch: 3.5 mm, Number of positions: 2, Color: red Plug-in bridge - FBS 3-3,5 - 3213027 Plug-in bridge, Pitch: 3.5 mm, Number of positions: 3, Color: red Plug-in bridge - FBS 4-3,5 - 3213030 Plug-in bridge, Pitch: 3.5 mm, Number of positions: 4, Color: red Plug-in bridge - FBS 5-3,5 - 3213043 Plug-in bridge, Pitch: 3.
PAGE 13
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Accessories Plug-in bridge - FBS 20-3,5 - 3213069 Plug-in bridge, Pitch: 3.5 mm, Number of positions: 20, Color: red Plug-in bridge - FBS 2-3,5 BU - 3213086 Plug-in bridge, Pitch: 3.5 mm, Number of positions: 2, Color: blue Plug-in bridge - FBS 3-3,5 BU - 3213099 Plug-in bridge, Pitch: 3.
PAGE 14
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Accessories Plug-in bridge - FBS 10-3,5 BU - 3213125 Plug-in bridge, Pitch: 3.5 mm, Number of positions: 10, Color: blue Plug-in bridge - FBS 20-3,5 BU - 3213138 Plug-in bridge, Pitch: 3.5 mm, Number of positions: 20, Color: blue Plug-in bridge - FBS 2-3,5 GY - 3213153 Plug-in bridge, Pitch: 3.
PAGE 15
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Accessories Plug-in bridge - FBS 5-3,5 GY - 3213183 Plug-in bridge, Pitch: 3.5 mm, Number of positions: 5, Color: gray Plug-in bridge - FBS 10-3,5 GY - 3213196 Plug-in bridge, Pitch: 3.5 mm, Number of positions: 10, Color: gray Plug-in bridge - FBS 20-3,5 GY - 3213206 Plug-in bridge, Pitch: 3.
PAGE 16
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Accessories Zack marker strip - ZB 3,5,QR:FORT.ZAHLEN - 0801405 Zack marker strip, Strip, white, labeled, Printed vertically: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, Mounting type: Snap into tall marker groove, for terminal block width: 3.5 mm, Lettering field: 3.5 x 10.
PAGE 17
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Accessories Marker for terminal blocks - UCT-TMF 3,5 CUS - 0829644 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 3.5 mm, Lettering field: 2.7 x 4.
PAGE 18
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Accessories Software - CLIP-PROJECT PROFESSIONAL - 5146053 Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and labels for identifying terminal blocks, conductors and cables, and devices. Reducing bridge Reducing bridge - RB ST (2,5/4)-1,5/S - 3214356 Reducing bridge, Pitch: 6.
PAGE 19
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Accessories Zack marker strip - ZB 3,5:UNBEDRUCKT - 0829414 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, Mounting type: Snap into tall marker groove, for terminal block width: 3.5 mm, Lettering field: 3.5 x 10.
PAGE 20
https://www.phoenixcontact.com/hq/products/3210302 Knife disconnect terminal block - PT 1,5/S-MT BU - 3210302 Accessories Marker for terminal blocks - US-TM 100 - 0829255 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, Mounting type: Snap into universal marker groove, Lettering field: 104 x 9.