Datasheet

https://www.phoenixcontact.com/gb/products/2938976
06/18/2019Page3/8
Power supply unit-QUINT-PS-100-240AC/48DC/20-2938976
Technical data
Output data
Peak switching voltages nominal load
< 30 mV
PP
(20MHz)
Maximum power dissipation in no-load condition 28 W
Power loss nominal load max. 80 W
General
Net weight 3.5 kg
Operating voltage display Green LED
Efficiency > 92 % (for 230 V AC and nominal values)
Insulation voltage input/output 4 kV AC (type test)
2 kV AC (routine test)
Insulation voltage input / PE 3.5 kV AC (type test)
2 kV AC (routine test)
Insulation voltage output / PE 500 V DC
Protection class I (with PE connection)
Degree of protection IP20
MTBF (IEC 61709, SN 29500) > 500000 h
Mounting position horizontal DIN rail NS 35, EN 60715
Assembly instructions alignable: horizontally 0mm, vertically 50mm
Connection data, input
Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 4 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 10
Stripping length 8 mm
Screw thread M3
Connection data, output
Connection method Screw connection
Conductor cross section solid min. 0.5 mm²
Conductor cross section solid max. 16 mm²
Conductor cross section flexible min. 0.5 mm²
Conductor cross section flexible max. 10 mm²
Conductor cross section AWG min. 20
Conductor cross section AWG max. 6
Stripping length 10 mm
Screw thread M4
Signaling
Output name DC OK active