Datasheet
QUINT4-PS/3AC/24DC/5
107103_en_00 PHOENIX CONTACT 5 / 38
4 Technical data
Input data
Unless otherwise stated, all data applies for 25°Cambient temperature, 400VAC input voltage, and nominal
output current (I
N
).
Input voltage range 3x 400 V AC ... 500 V AC -20 % ... +10 %
2x 400 V AC ... 500 V AC -10 % ... +10 %
± 300 V DC -25 % ... +30 %
Frequency range (f
N
) 50 Hz ... 60 Hz -10 % ... +10 %
Network type Star network
Current consumption 3x 0.53 A (400 V AC)
3x 0.46 A (480 V AC)
2x 0.9 A (400 V AC)
2x 0.8 A (480 V AC)
0.3 A ( 300 V DC)
The specified values for current consumption apply for operation in the static boost(P
N
x125%).
Discharge current to PE
typical
< 3.5 mA
1 mA (550 V AC, 60 Hz)
Mains buffering ≥ 28 ms (3x 400 V AC)
≥ 40 ms (3x 480 V AC)
Switch-on time < 500 ms
Typical response time from SLEEP MODE 300 ms
Protective circuit Transient surge protection Varistor, gas-filled surge arrester
Switch-on current surge limitation typical after 1 ms 10 A
Inrush surge current I
2
t< 0.2 A
2
s
During the first few microseconds, the current flow into the filter capacitors is excluded.
SCCR value (Short Circuit Current Rating) of the power supply unit corresponds to the SCCR value of the
backup fuse (see input protection table).
Input protection (to be connected externally upstream)
Input current I
In
Input protection
Circuit breaker
Neozed fuse
or equivalent
Power switch
Characteristics A B C D K gG
≤ 13 x I
In
(maximum magnetic tripping)
4 A - - -- - -
6 A - - - - -
8 A - --- - -
10 A - - - - -
13 A ---- - -