Data Sheet

https://www.phoenixcontact.com/us/products/2902033
May 3, 20171/11
Limit value switches-MINI MCR-2-UI-REL-2902033
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
The figure shows the MINI
MCR-2-UI-REL-PT version
Universally configurable limit value switch with PDT relay output and plug-in connection technology
for switching analog limit values. Configurable via DIP switch or software. Screw connection
technology, standard configuration.
Article description
Universally configurable limit value switch with PDT relay output and plug-in connection technology for switching analog limit values.
Current signals between 0 mA ... 24 mA and voltage signals between 0 V ... 12 V can be processed on the input side. A relay with PDT
contact is available on the output side. It is then possible to switch loads up to 250 V AC/DC and max. 6 A. You can configure the device
using one of the free software solutions. Default settings can also be made directly on the device by simply using the DIP switches (see
configuration table). The measuring transducer supports fault monitoring and NFC communication. 
   
Key commercial data
package_quantity
1
GTIN
4046356652056
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
6.2 mm
Height
110.5 mm
Depth
120.5 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20
Input data
Configurable/programmable
Yes
Voltage input signal
0 V ... 10 V (via DIP switch)
Voltage input signal
0 V ... 12 V (via DIP switch)