Datasheet

QUINT-PS/3AC/24DC/20
103132_en_00 PHOENIX CONTACT 7
Block diagram
L1 (+)
L2
L3 (-)
PE
13
I<I
N
OK
DC
14
Safety notes
DANGER OF EXPLOSION!
Remove an item only when it is not connected to power or if it is located in the non-explosive area!
DANGER
Components with dangerously high voltage and high stored energy are located in the device!
Never carry out work on live parts!
Depending on the ambient temperature and the load, the housing can become very hot!
WARNING
Before startup please ensure:
The mains connection has been carried out by a competent person and protection against electric shock is
guaranteed!
The device can be disconnected outside the power supply unit in accordance with the regulations as in EN
60950 (e.g. through primary side line protection)!
The ground conductor is connected!
All feed lines are sufficiently protected and dimensioned!
All output lines are dimensioned according to the maximum output current of the device or separately
protected!
Sufficient convection is guaranteed!
ATTENTION
The power supply units are built-in devices. The device may only be installed and put into operation by
qualified personnel. The corresponding national regulations must be observed.