Datasheet

https://www.phoenixcontact.com/us/produkte/2866530
Nov 10, 20132/5
Power supply unit-TRIO-PS/600DC/24DC/20-2866530
Technical data
Output data
Nominal output voltage
24 V DC ±1%
Setting range of the output voltage
22.5 V DC ... 29.5 V DC (U
IN
> 475 V DC)
Setting range of the output voltage
22.5 V DC ... 28 V DC (U
IN
≤ 475 V DC)
Output current
20 A (-25°C ... 55°C)
Derating
55 °C ... 70 °C (2.5%/K)
Connection in parallel
Yes, for redundancy and increased capacity
Connection in series
Yes
Max. capacitive load
Unlimited
Current limitation
Approx. 25 A (for short-circuit)
Control deviation
< 1 % (change in load, static 10% ... 90%)
Control deviation
< 2 % (change in load, dynamic 10% ... 90%)
Control deviation
< 0.1 % (change in input voltage ±10%)
Residual ripple
< 40 mV
PP
Peak switching voltages nominal load
< 10 mV
PP
Maximum power dissipation NO-Load
3.8 W
Power loss nominal load max.
45 W
General
Net weight
2 kg
Efficiency
> 91 % (With 600 V DC and nominal values)
Insulation voltage input/output
4 kV AC (type test)
Insulation voltage input/output
2 kV AC (routine test)
Protection class
I, with PE connection
MTBF (IEC 61709, SN 29500)
> 701147 h (According to EN 29500)
Mounting position
horizontal DIN rail NS 35, EN 60715
Assembly instructions
Can be aligned: Horizontally 0 mm, vertically 50 mm
Electromagnetic compatibility
Conformance with EMC Directive 2004/108/EC
Low Voltage Directive
Conformance with LV directive 2006/95/EC
Standard – Electrical equipment of machines
EN 60204
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power
installations and their assembly into electrical power
installations
EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage
EN 60950-1 (SELV)
Standard – Safety extra-low voltage
EN 60204 (PELV)
Standard - Safe isolation
DIN VDE 0100-410
Standard - Safe isolation
DIN VDE 0106-1010
Standard – Protection against electric shock
DIN 57100-410
Standard – Protection against shock currents, basic
requirements for protective separation in electrical equipment
DIN VDE 0106-101
Standard – Limitation of mains harmonic currents
EN 61000-3-2
UL approvals
UL/C-UL listed UL 508
UL approvals
UL/C-UL Recognized UL 60950