Datasheet

https://www.phoenixcontact.com/us/produkte/2865573
Nov 13, 20132/8
Temperature measuring transducer-MACX MCR-EX-SL-RTD-I-
NC-2865573
Technical data
Input data
Sensor types (RTD) that can be used
Pt, Ni, Cu sensors: 2, 3, 4-wire
Temperature measuring range
-200 °C ... 850 °C (Range depending on the sensor type)
Input signal range
0 Ω ... 2000 Ω
Cable resistance
(50 Ω per line)
Sensor input current
(200 μA ... 1 mA)
Measuring range span
min. 50 K
Output data
Signal output
Current output
Current output signal
0 mA ... 20 mA
Current output signal
4 mA ... 20 mA
Load/output load current output
max. 500 Ω
Output ripple (current)
< 50 µA
PP
Behavior in the event of a sensor error
As per NE 43 or can be freely defined
Power supply
Supply voltage range
19.2 V DC ... 30 V DC
Max. current consumption
< 40 mA (24 V DC)
Power consumption
< 1 W
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section stranded min.
0.2 mm²
Conductor cross section stranded max.
2.5 mm²
Conductor cross section AWG/kcmil min.
24
Conductor cross section AWG/kcmil max
14
Stripping length
7 mm
Screw thread
M3
Connection method
Screw connection
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
General
No. of channels
1
Temperature coefficient, typical
0.01 %/K
Step response (0–99%)
typ. 800 ms (With SIL)
Step response (0–99%)
max. 1200 ms (With SIL)
Step response (0–99%)
typ. 700 ms (Without SIL)
Step response (0–99%)
max. 1100 ms (Without SIL)
Alignment zero
± 5 %
Alignment span
± 5 %