Datasheet

ManualsBrandsPHOENIX CONTACT ManualsElectronic Control SystemsPower/input isolating amplifier MACX MCR-EX-SL-RPSSI-I

https://www.phoenixcontact.com/us/products/2865340

04/07/2017Page1/14

Power/input isolating amplifier-MACX MCR-EX-SL-RPSSI-I-2865340

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Ex i repeater power supply and input signal conditioner, HART. Transmits supplied or active 0/4 - 20 mA signals

from the hazardous area to a load (active or passive) in the safe area. 3-way electrical isolation; SIL 2 according

to IEC 61508, with screw connection

Why buy this product

0/4mA...20mA input, intrinsically safe, [Ex ia], powered and not powered

Measuring transducer supply voltage >16V

0/4mA...20mA output, active up to 1000 load or passive

Bidirectional HART signal transmission

Error indication according to NAMURNE43

SIL 2 according to IEC 61508/EN 61508

Installation in Ex zone 2 permitted

3-way electrical isolation

Power supply possible via DIN rail connector

Plug-in connection terminal blocks, screw connection technology, with integrated sockets for HART communicators

Housing width: 12.5mm

Minimal power dissipation

High transmission accuracy

Key Commercial Data

Packing unit 1 STK

GTIN

GTIN 4046356160353

Weight per Piece (excluding packing) 170.000 g

Custom tariff number 85437090

Country of origin Germany

Summary of content (14 pages)

PAGE 1
https://www.phoenixcontact.com/us/products/2865340 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I - 2865340 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Ex i repeater power supply and input signal conditioner, HART.
PAGE 2
https://www.phoenixcontact.com/us/products/2865340 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I - 2865340 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 12.5 mm Height 112.5 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position) Ambient temperature (storage/transport) -40 °C ...
PAGE 3
https://www.phoenixcontact.com/us/products/2865340 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I - 2865340 Technical data Output data Current output signal 0 mA ... 20 mA (active) 4 mA ... 20 mA (active) 0 mA ... 20 mA (14 ... 26 V ext. source voltage) 4 mA ... 20 mA (14 ... 26 V ext.
PAGE 4
https://www.phoenixcontact.com/us/products/2865340 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I - 2865340 Technical data General < 600 µs (for jump 0 mA ...
PAGE 5
https://www.phoenixcontact.com/us/products/2865340 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I - 2865340 Technical data Safety characteristic data λSU 4.867 x 10 (486.7 FIT) λSD 0 λDU 5 x 10 (50 FIT) λDD 0 Probability of a hazardous failure on demand (PFDAVG) 2.40 x 10 (1 year) -7 -8 -4 -4 4.76 x 10 (2 years) -4 7.13 x 10 (3 years) -4 9.50 x 10 (4 years) -4 11.
PAGE 6
https://www.phoenixcontact.com/us/products/2865340 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I - 2865340 Technical data Safety data Max. internal inductance Li negligible Max.
PAGE 7
https://www.phoenixcontact.com/us/products/2865340 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I - 2865340 Technical data Environmental Product Compliance For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Block diagram Sensor / Field Dimensional drawing 116 (SP) 112,5 PLC / DCS OUT IN AI 99 passive 4.2 - 4.2 4.1 + 4.1 3.2 3.2 3.1 3.1 HHT 7 + HHT or 2.2 2.1 + active 250 Ω GND 5.1 HHT +24V 3.2 + 1.2 1.1 2.
PAGE 8
https://www.phoenixcontact.com/us/products/2865340 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I - 2865340 Approvals Ex Approvals IECEx / ATEX / UL Listed / cUL Listed / EAC Ex / cULus Listed Approval details UL Listed  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267 cUL Listed  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267 Functional Safety BVS Pb 03/08 GL  EAC  BV  cULus Listed  http://exchange.dnv.
PAGE 9
https://www.phoenixcontact.
PAGE 10
https://www.phoenixcontact.
PAGE 11
https://www.phoenixcontact.
PAGE 12
https://www.phoenixcontact.
PAGE 13
https://www.phoenixcontact.com/us/products/2865340 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I - 2865340 Accessories Module carrier Module carrier - TC-D37SUB-ADIO16-EX-P-UNI - 2924854 Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via DSUB connector, 37-pos.
PAGE 14
https://www.phoenixcontact.com/us/products/2865340 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I - 2865340 Accessories Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, Color: silver Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.