Datasheet

https://www.phoenixcontact.com/us/produkte/2864480
Nov 14, 20131/8
Limit value switches-MINI MCR-SL-UI-REL-2864480
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
MCR limit value switch, with adjustable hysteresis and delay time, with screw connection
Product Description
The 6.2mm wide configurable 3-way threshold value switch MINI MCR-SL-UI-REL... is used to control and monitor analog standard
signals.On the input side, the analog standards signals 0...20mA or 0…10V per DIP switch can be set. On the output side, a relay
with PDT contact is available. The switching thresholds are set via potentiometer.The DIP switches located on the side of the housing
have the following functions:– Configuration of the switching hysteresis,–Configuration of the operating and closed circuit current
behavior,–Setting of relay pickup times–Setting of dropout delayThe relay status is indicated by a yellow LED on the front of the
housing.Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the
DIN rail connector. 
Product Features
Power supply possible via the foot element (T-connector)
Highly-compact threshold value switch for switching analog limit values
Status and error indication via two diagnostic LEDs
Operating current/closed circuit current switch-over
PDT relay at output
Limit value can be freely adjusted via potentiometer on the front
Input signal, hysteresis, and delay time can be configured via DIP switches
3-way isolation
  
Key commercial data
package_quantity
1
GTIN
4017918974879
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
6.2 mm
Height
93.1 mm
Depth
102.5 mm