Datasheet
https://www.phoenixcontact.com/us/produkte/2864105
Nov 13, 20131/7
Switching amplifier-MINI MCR-SL-NAM-2RNO-2864105
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Configurable NAMUR switching amplifier for proximity sensors, floating switching contacts and
switching contacts with resistance circuit. On the output side 2 N/O contact, with screw connection
Product Description
The 6.2 mm wide MINI MCR-SL-NAM-2RNO.... is a configurable 4-way isolation amplifier. It is suited for the operation of proximity
sensors in acc. with EN 60947-5-6 and switches and also has two relay outputs. The second output can either be used to duplicate
signals or for signaling faults for the sensor line.The DIP switches are accessible on the housing side and allow the following parameters
to be configured:–Switchover from open circuit to closed circuit current behavior–Activation of line fault detection of the sensor line as
well as–Selection of signal duplication/fault signalingPower (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks
on the modules or in conjunction with the DIN rail connector.
Product Features
Floating contacts and contacts with resistance circuit can be connected
Power supply possible via the foot element (T-connector)
Highly compact isolation amplifier for electrical isolation, amplification, and duplication of proximity sensor signals
For proximity sensors according to IEC 60947-5-6 and EN 50227
Second output can be used as a duplicator or error signaling output
Error indication via diagnostic LED and analog signal
3-way isolation
Input and output signals can be configured via DIP switches
Operating current/closed circuit current switch-over (inverted switching behavior)
N/O contacts at output
Key commercial data
package_quantity
1
GTIN
4046356046459
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
6.2 mm
Height
93.1 mm