Instruction Manual

[e-mail]
www.phnxaudio.com
CONNECTIVITY:
Microphone input is connected to "IN 2". Units are preset to line level with 6dB boost and phantom power
off.
Far-end input is connected to "IN 1". Connect your system speakers output into this jack. Units are preset
to line level.
*Note: Far-end input will be received through the USB channel if active.
The following input settings for IN 1 and IN 2 are available through the SDK:
Mic level (280mV peak-to-peak)
Line level (4V peak-to-peak)
Additional 6dB boost
Optional 3V phantom power supply
Output to room speakers is through "OUT 1". Units are preset to line level.
Far-end output to system is through "OUT 2". Units are preset to line level.
*Note: Far-end output will be transmitted through the USB channel if active.
The following output settings for OUT 1 and OUT 2 are available through the SDK:
Mic level (200mV peak-to-peak)
Line level (2V peak-to-peak)