User manual

(1) Controller can protect itself, but any connected loads might be damaged.
(2) Short circuit: >4x – 6x nominal current.
(3) Battery must be protected by a fuse, or it might be permanently damaged in case
of short circuit.
(4) >200% nominal current: disconnect with 3s delay
WARNING: The combination of different error conditions may cause damage to the
controller. Always remove the fault condition before you continue with connecting
the controller!
Error Description
Error Display Reason Remedy
Loads are
not
supplied
with energy Red LED on
Battery is low Load will
reconnect as soon
as battery is
recharged.
35