User manual

Description of Functions

 The charge controller protects the battery from being overcharged by the solar

array and from being deep discharged by the loads. The charging characteristics

include several stages which include automatic adaptation to the ambient

temperature.

 The charge controller is intended for use at 12V system voltage.

 The charge controller has a number of safety and display functions.

Connecting and Grounding

The controller is intended for indoor use only. Protect it from direct sunlight and

preferrably place it in a dry environment. Please verify that all cable/wire connections

are done properly and well insulated and that no water or humidity can ingress. This

avoids any bad or loose connections that would result in excessive heating or further

damage. The controller measures the ambient temperature to determine the

charging voltage. Controller and battery must be installed in the same room. The

controller warms up during operation, and should therefore be installed on a non