User manual

Please observe all instructions with regards to external fuses/breakers as indicated.

The information contained in this manual must be observed in its full extent. The

manual contains information regarding installation, set up, and operation.

Please read this manual carefully before using the product, and pay special attention

to the safety recommendations in it.

Maintenance and installation notes

When installing or working on the PV system, please disconnect the PV (solar)

modules from the charge controller first, to prevent any damages to the charge

controller!

Please verify that all cable/wire connections are done properly and well insulated and

that no water or humidity can ingress. This avoids any bad or loose connections that

would result in excessive heating or further damage.

Please install a fuse or breaker near the battery before installing or adjusting the

controller!

High voltage risks

Never touch any electrical conductors to avoid electrical shock.