Instructions / Assembly

4. Brakes

a. If you notice the braking performance deteriorating, check whether

there is brake oil in the brake fluid reservoir or not. If there is none,

do add it in order to get the brakes to the required sensitivity.

b. If brake oil is added but the brake’s performance remains terrible,

the brake pads might need urgent replacement.

a. When you feel the grip loosen, adjust the screw between the grip

and the T-tube with a hex wrench.

5. Folding Parts

a. Pour some lubricant into the clutch sleeve of the folding handle

every six months.

Note: Do not use wd40 to lubricate the spare parts. Also, do not

lubricate the front and rear wheels. Please contact us, if you have

questions on this.

6. Lubrication

a. When the tires begin showing obvious signs of wear and tear,

please replace them.

7. Tire

8. Cleaning

a. Clean the scooter using mild cleaning agents, protective agents and

soft cotton.

b. Do not use solvents in cleaning the scooter.

c. Never spray water directly on the scooter.

d. After cleaning it using soft cotton, rinse with clean water to ensure no

detergent residue remains. After that, wipe with a dry cloth.

e. Clean the brake parts very carefully without allowing water to get in.

Even water vapor on brake components may cause the brake to

malfunction.

f. Apply protective oil to the suspension parts of the scooter periodically.

USAGE AND MAINTENANCE