Instructions / Assembly

DISPLAY P-VALUE INTRODUCTION
Menu
Description
Default
P01
Voltage level: 48V, 60V,72V
Default=48
P02
metric mile switching; 0: KM/H; 1: MPH
Default=1
P03
Default shutdown time: Adjustable between 0-
60min
Default=5
P04
Wheel diameter: 8 - 22 inches
Default=10
P05
Zero or non-zero start settings: 0 (zero start), 1
(non-zero start)
Default=0
P06
Speed measuring magnetic steel number.The
range is 0-255.
Default=30
P07
Null
Default=0
P08
Null
Default=0
Notice: P-values are set at factory defaults, please only adjust if
necessary.
!
Take great care when shifting modes while riding. Downshifting while
traveling at higher speeds will result in a sudden loss of power till the
scooter slows to the new lower top speed. Conversely, upshifting while
riding will suddenly increase the amount of power delivered via the throttle.
YUME recommends that the throttle be released/disengaged when
changing modes.
Please use the mode switch function with caution.
IMPORTANT:
16