Instructions / Assembly
DISPLAY FUNCTION OPERATION
Menu
Description
Unlock 
power-on 
password
When the meter is turned on, the interface will 
display "- - - - ". Use the "+" and "-" buttons to adjust 
the number up or down and double-click the power 
button to confirm each number of the password. The 
default password is: 1111(YUME RIDE application 
setting can change the password ).
NFC 
unlock & 
lock
a. After turning the scooter on, place the NFC key 
near the display's NFC sensor to automatically unlock 
the scooter. 
b. While the scooter is powered on and in an 
unlocked state, placing the NFC key near the sensor 
area locks the scooter.
Menu 
setting
Cycle 
through P 
settings 
menu
Long press the "+" button and "-" button 
together to enter the P-Setting.
Press the power button to toggle 
through the various P-Settings.
Change P 
Setting 
value
Press the "+" or "-" buttons to change 
the value for each P-Setting. 
Return to 
home page
a. Long press the "+" button and "-" 
button together to save the P-Setting 
and return to the home screen.
b. If there is no operation on the page, it 
will automatically exit the settings menu 
after 8 seconds.
12










