Instructions / Assembly

CHARGING OPERATION

Note: You should plug the charger cord into the power outlet

before connecting it to the charging port to avoid a short circuit.

Likewise, please avoid charging the battery for extended periods,

such as the scooter being plugged in overnight, for this same reason.

Aside from battery damage, it could lead to a fire accident.

3. Now insert the AC plug, which is the

other end of the charger, into a power

outlet. Once the battery is 100% full, the

charger’s light will turn green. When

anything less than 100% full (i.e. still

charging), the charger’s light will remain

red.

1. First, ensure that the two parts of

the charger (i.e. the AC wall

plug/power cord and the transformer)

are firmly connected.

2. Next, locate the three-pin connector on

one end of the charger. Open up the

charging port’s cover to spot the charging

hole. Align the three-pin connector with

the pinholes and gently insert the cable.

Once the connector reaches its maximum

position, it connects to the scooter's

charging port. The charger's groove should

be aligned with the charging hole.

NOTE: Ensure that the three-pin

connector is precisely aligned with the

charging socket. Failure to do so may

cause a short circuit within the charging

port.