User's Manual

USER MANUAL SMARTPAIR BEACON
©
2022 Phillips Connect LLC SmartPair Beacon™ User Manual Page 2 of 7
1. INTRODUCTION
The SmartPair Beacon™ from Phillips Connect Technologies, in conjunction with a Phillips Asset Tracking
Gateway, comprise the main components of the Tractor Trailer Pairing System. The SmartPair Beacon is
typically affixed to the Tractor and is programmed with a unique Tractor ID number.
Bluetooth advertisements from SmartPair Beacons are received and collected by the Phillips Gateway
located on the Trailer, then parsed until it can be determined that one SmartPair Beacon has been
successfully associated with one Gateway. Changes in pairing status are reported by the Gateway to a
Remote Listener System, which collects data for tracking and analysis.
SmartPair Beacon features include:
IP67 Waterproof Standard
2-minute Installation with VHB Tape
Bluetooth Low Energy (BLE) Beacon
A typical application is illustrated in #19 below: