User's Manual

USER MANUAL
© 2021 Phillips Connect LLC
Smart7 Lid User Manual
Page 2 of 9
1.
INTRODUCTION
The Battery Operated LTE Cellular GPS Tracker from Phillips Connect Technologies is a vehicle tracking
device that combines GPS location with LTE and Bluetooth. The Smart7 Lid monitors vehicle functions
and collects data for tracking and analysis.
The Smart7 Lid appears to the user of a server application as a single endpoint device. It can be queried,
updated, and configured either through a serial connection or an over-the air (OTA) LTE IP connection.
The Smart7 Lid presents itself over the connections as an enhanced cellular modem with attached
functional elements. These elements include:
GPS location engine
General Purpose Bidirectional I/O (GPIO) pins
Relay drive pin output
Serial UART port
CAN Communication (optional)
BLE 5.0
The following is a typical application scenario:
2.
HARDWARE FEATURES
The Smart7 Lid ships from the factory pre-configured for a specific set of functions and is completely
configurable in the field, while providing support for external control through a Phillips Connect
proprietary set of AT commands. Supported features include the following: