Installation Guide

LED Troubleshooting
[TECHNICAL DATA]
Technical Data
Operating Voltage 7V - 28V
Power Consumption 2.5 mA (standby), 50 mA (active)
Operating Temperature -30
o
C to +75
o
C
Storage Temperature -40
o
C to +85
o
C
Operation Humidity 20% to 90% (non-condensing)
Solid Green = Cellular Signal is OK
Flashing Green = Searching
Solid Red = GPS Signal is OK Flashing
Flashing Red = Searching
Note: The following LED behavior is indicative of an over-the-air update:
• Solid Red (15 secs.)
• Green and Red flashing simultaneously (about 60 secs.).
Installation may continue while device receives updates, however, al
ways confirm both LEDs are solid before finalizing.