Installation Guide

Welcome
Experience 4G LTE Evo, the next evolution in GPS tracking. Advantage by
Procon Analytics - where automotive telematics meets genuine analytics.
Installation Made Easy
Tools needed for install: screwdrivers, wire strippers and cutters, crimping
tool and voltmeter. Plus, you might want to have the
following handy: connectors, velcro, and zip ties.
• Make sure there is not metal above the device as it may interfere
with the signal.
• Keep it from direct exposure to the sun, heat, rain, moisture, etc., and
away from heater vents or hot engine compartments.
• Do not tightly kink or wrap excess cable.
Mounting Evo
[ILLUSTRATIONS 1 & 2]
• Install the Evo device in a concealed location under the dash.
• Hold it in place.
• Mark the location for the velcro.
• Attached velcro to the back of the device
and the other to the dash.
FACING DOWN!