User manual

Problem Possible cause Solution
The shaving heads are
dirty.
Clean the cutters and
guards with the cleaning
brush supplied. See chapter
‘Cleaning and maintenance’.
Long hairs obstruct the
shaving heads.
Clean the cutters and
guards with the cleaning
brush supplied. See chapter
‘Cleaning and maintenance’.
Shaving foam or shaving
gel has accumulated in
the shaving heads.
Rinse the shaving heads
thoroughly with a sufcient
amount of water.
The
appliance
does not
work when I
press the on/
off button.
The rechargeable
battery is empty.
Recharge the battery. See
chapter ‘Charging’.
The temperature of the
appliance is too high. In
this case, the appliance
does not work.
Let the appliance cool down.
As soon as the temperature
of the appliance has dropped
sufciently, you can switch on
the appliance again.
When you remove
the adapter from the
wall socket and leave
the small plug in the
appliance, the appliance
does not work for a few
seconds.
Remove the small plug from
the appliance.
ENGLISH24