User manual

Problem Possible cause Solution
The temperature of the
appliance is too high. In this
case, the appliance does
not work.
Let the appliance cool down.
As soon as the temperature of
the appliance has dropped
sufciently, you can switch on
the appliance again.
When you remove the
adapter from the wall
socket and leave the small
plug in the appliance, the
appliance does not work
for a few seconds.
Remove the small plug from the
appliance.
My skin is
irritated after
shaving.
Your skin needs time to get
used to the Philips shaving
system.
Skin irritation during the rst
2-3 weeks of use is possible.
After this period, the skin
irritation usually disappears.
The shaving heads are
damaged or worn.
Replace the shaving heads.
See chapter ‘Replacement’.
The rotation
speed of the
shaving heads
is lower than
usual.
Too much dirt has collected
in the shaving heads.
Clean the shaving heads. See
chapter cleaning and
maintenance.
The rechargeable battery
is low.
Recharge the battery.
See chapter ‘Charging’.
The shaving
heads do not
stay in place.
You did not x the retaining
rings properly.
The retaining ring is xed
properly if the four wings of the
retaining ring are located exactly
under the recesses of the
shaving head holder.
ENGLISH18