User manual

62 Taking pictures
Take a picture
1. If the self-timer option is Off , and once the
camera was activated, press
m to take a picture.
2. The number that appears shows its row. Press:
The number of pictures you can save varies according
to the settings: the higher the resolution, the bigger
the file size. A message will warn you if there isn’t
enough memory left. In this case, you must delete data
before storing a new picture (see “Memory status”
page 44).
When they are saved in the Picture album , the pictures
are named "img_0001.jpg", etc., up to 9999. This
does not mean you can take up to 9999 pictures, but
that pictures are numbered up to 9999. Numbering
will then restart from 1 on.
Use the self-timer
1. Set the self-timer option On , then press m to
activate it (or press
0 if the option is Off ).
2. The countdown starts at 10 seconds (this value
cannot be changed). A sound is played 3 seconds
before the picture is taken, then again when it’s
actually shot.
Press c to stop the timer and go back to preview
mode or press 0 to just stop the timer.
3. Once the picture is shot, follow the instructions
starting at point 2 described in “Take a picture”.
Foto Talk: use the Clip mode
The Clip mode allows you to make a clip made of a
picture and a sound.
1. Select the Clip mode, then press m to take the
picture.
2. The Record sound window automatically opens:
record the sound or message of your choice
(press
c to cancel, , to stop the recording,
or wait for the maximum recording time of
30 seconds to be reached).
c
To ignore the picture you have just taken
and go back to preview mode.
m
To save it in the Picture album .
,
To access the list of available options:
Send (by MMS, Email or infrared), Save it
in the
Picture Album , Modify it, or Take a
new picture
.