Important Information Manual

9
English
Signal Description of signal Meaning of signal
A number between '00'and '90' flashes on the
display.
The appliance is charging.
The number '100' lights up on the display. After a full charging cycle, this signal
appears to show that the rechargeable
battery is fully charged.
The battery symbol lights up on the display. The appliance is in standby mode with
a fully charged battery.
A number between '00' and '10' together with the
battery icon flash on the display.
The rechargeable battery of the
appliance is low.
The display shows a flashing square and the orange
filter cleaning icon also flashes.
It indicates the recommended time to
check and clean the filter (Fig. 7) to
ensure the best performance of the
appliance.
Error code 'E1' lights up on the display.
Note: When the appliance is charging on the charging
station, the E1 error code may look like the number
13.
This indicates that the appliance has
been stored or charged at a
temperature below 5°C. Move the
appliance to a warmer room. Do not
store or charge the appliance at a
temperature below 5°C or above 40°C.
Error code 'E4' lights up on the display.
Note: When the appliance is charging on the charging
station, the E4 error code may look like the
designation h3
The roller brush in the 360° suction
nozzle or in the mini Turbo brush has
become blocked and cannot turn
freely. Switch off the appliance and
check the roller brush for obstructions
or entangled hairs.
Error code 'E6' lights up on the display.
Note: When the appliance is charging on the charging
station, the E6 error code may look like the number
93.
The adapter or battery may be
defective. Please contact the Consumer
Care Center or take the appliance to an
authorized Philips service center.
Error code 'E7' lights up on the display.
Note: When the appliance is charging on the charging
station, the E7 error code may look like the
designation L3
The adapter may be defective. Please
contact the Consumer Care Center or
take the appliance to an authorized
Philips service center.
Error code 'SE' lights up on the display.
Note: When the appliance is charging on the charging
station, the SE error code may look like the number
35.
SE stands for service.Please take the
appliance to an authorized Philips
service center.