User Guide

1 For optimal performance of the water purier, replace the lter
cartridge if either of the following situations occurs:
A Youhaveusedtheltercartridgeforsixmonths.
B Thehollowbreoftheltercartridge(visiblethroughthecartridge
window)hasturnedrustbrownordarkgrey(seesection‘Cartridge
replacementindicator’).
C Thevolumeofpuriedwaterdecreasessubstantially.
D Thelteredwaterstillhasanunpleasantsmellorisstillturbid
afterpurication.
2 To change the lter, close the tap and set the water selection lever
to the unltered stream position. (Fig. 22)
3 Tilt the used lter cartridge 90° backwards and pull it off the water
purier housing (Fig. 23).
4 Write down the replacement date on the information label of the
new cartridge.
5 Tilt the new lter cartridge 90° backwards and insert it into the
water purier housing.
6 Pull the cartridge upwards until it is in upright position. (Fig. 24)
Cartridge replacement indicator
Tohelpyoudeterminewhentoreplacetheltercartridge,thewater
purierandeachreplacementltercartridgecomeswithaself-adhesive
colour-codedcartridgereplacementindicator.Placethisreplacement
indicatorinaconvenientplaceforfuturereference.
Tip: Remove the cover of the lter cartridge and stick the cartridge
replacement indicator to the inside of the cover. Check the colour of the
hollow bre of the lter cartridge through the cartridge window from time to
time. If the colour of the lter matches the rust brown or dark grey shown on
the cartridge replacement indicator, replace the lter cartridge (Fig. 27).
ENGLISH12