pg001-041_was7000_97 2006.12.
pg001-041_was7000_97 2006.12.14 1:38 PM LGPL Library written offer This product contains Linux 2.4.27-vrsl, that is made available under the GNU LGPL license version 2.1 (hereafter called “the Library”). Philips Electronics Hong Kong Ltd.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 3 1. General information 1.1 About WAS7000 _______________ 5 1.2 Supplied accessories _____________ 5 1.3 Philips on-line support ____________ 6 1.4 Environmental information ________7 1.5 Maintenance ___________________ 7 1.6 Safety information _______________ 8 2. Controls 2.1 Controls on the Station ________ 9-10 2.2 Station’s remote control _______11-12 2.3 Icons on LCD display ____________12 3. Installation 3.1 Placing Station __________________13 3.
pg001-041_was7000_97 2006.12.14 1:38 PM Contents English 9. UPnP (Universal Plug and Play) 9.1 About UPnP _________________ 30 9.1.1 About the UPnP-enabled device 9.2 Connecting to the UPnP device __ 30 9.3 UPnP playback ________________ 30 9.3.1 Playing music from the UPnP device 10. Sleep _______________________ 31 11.Alarm 11.1 Setting alarm _________________ 32 11.1.1 Setting alarm time 11.2 Activating/ deactivating alarm ____ 32 11.2.1 Stopping alarm sound 11.2.2 Activating/ deactivating alarm 12.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 5 1.1 About WAS7000 Up to 5 WAS7000 Stations can be connected to a WAC7000 Center. You can centrally store up to 1500 audio CDs in the 80GB hard disk on WAC7000. All stored music will then be wirelessly streamed from the Center to the connected Stations via Wi-Fi**.Your music enjoyment will no longer be restricted by the location of your CD player or PC, nor the messy wiring.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 6 1. General information English 1.3 Philips on-line support Products from Philips have been designed and manufactured to the highest quality standards. If your Philips “Connected Planet” product is not working correctly, we recommend that you check the User Manual to verify that your product has been properly connected and configured. To enhance your home entertainment experience, our Connected Planet support website (www.philips.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 7 1. General information All redundant packaging material has been omitted.We have done our utmost to make the packaging easily separable into three mono materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). 1.5 Maintenance ● English 1.4 Environmental information Cleaning the Set Use a soft cloth slightly moistened with a mild detergent solution.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 8 1. General information English 1.6 Safety information ● Place the set on a flat, firm and stable surface. ● Keep the system, batteries or discs away from excessive moisture, rain, sand or any heat sources, such as heating equipment or direct sunlight. ● Place the set in a location with adequate ventilation to prevent internal heat build-up in your system.
2006.12.14 1:38 PM Page 9 2.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 10 2. Controls English 2.
pg001-041_was7000_97 2006.12.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 12 2.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 13 3.1 Place Station 3.2 Setting up Wi-Fi connection between Center and Station With detachable stand and by-packed wall mounting kits,WAS7000 Station allow you to place them in two ways: on desktops with stand or on wall without stand. You can add a station to an existing Wi-Fi network of Center and Station. Up to 5 WAS7000 stations can be connected to a WAC7000 Center.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 14 3. Installation English 3.3 Rear connections Warning: – Never make or change the connections when the mains is switched on. For the devices with USB cable: ● Insert one plug of the USB cable (not supplied) to the socket on the Station ● Insert the other end of the USB cable into the USB output terminal of the USB device 3.3.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 15 3.3.3 Connecting to other additional devices 1 It is possible to play audio output from an external source, e.g.TV,VCR, Laser Disc player, DVD player on the Station. On the additional device Connect one end of the audio cable (not supplied) to the AUDIO OUT terminals on the additional device R 3 1 Make sure that all connections have been made before switching on the power supply 2 Connect the AC power cord to the wall socket.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 16 4. Preparation English 4.1 Setting clock The time can be displayed in 24-hour or 12-hour format. 1 Press MENU to enter the menu screen. Helpful hints: To change to 12-hour or 24-hour format – In the Time menu, select Time Format (see the above Step 2) – Press 3 or 4 and 2 to select your option. – The clock setting will not be saved when the set is disconnected from the power supply.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 17 4.2 Using the remote control IMPORTANT! – The remote control might not be able to operate the other wireless music systems from Philips (e.g.WACS700,WACS5) – Always point the remote control directly towards the IR sensor on the Station you wish to operate. 4.3 Using navigation controls When selecting options on the set, you often need to use the navigation controls 1 / 2 / 3 / 4 1 Press 3 / 4 to highlight an option.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 18 5. Basic functions English 1 2 3 5.1 Switching to standby/on and selecting functions 5.2 Switching to power-saving mode When the set is switched on, press STANDBYON/ ECO POWER to switch it to standby mode (or press y on the remote control) ➜ The Red indicator lights up ➜ Display shows the connected or previously connected Center – The screen will remain empty if no Center is found ➜ The time will be displayed.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 19 5.3 Auto-standby 5.6 Sound control When the set has reached the end of playback and remains in the stop position for more than 20 minutes, the set will switch to standby mode automatically to save power. Equalizer enables you to select predefined sound settings. 5.4 Volume control 1 2 5.6.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 20 5. Basic functions English 5.6.3 Incredible surround ● Press INCR. SURR. once or more times to toggle the surround sound effect on or off ➜ Display shows IS ON or IS OFF 2 abc 1 SAME GENRE 1 SAME GENRE INCR.SURR. 4 ghi 5 jkl 6 mno SLEEP DIM RDS/NEWS 7 pqrs 8 tuv 9 wxyz MUSIC BROADCAST MUSIC FOLLOWS ME 5.7 Display adjustment You can adjust the backlight and contrast settings of the display.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 21 6.HD(Located on Center) Music is centrally stored in the 80GB hard disk on the WAC7000 Center. All the stored music can be streamed and played on the Station via Wi-Fi.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 22 6.HD(Located on Center) English 6.2 Selecting and searching 6.2.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 23 6.HD(Located on Center) 6.2.3 Selecting tracks of a particular 1 During playback, press SAME ARTIST ➜ Playback of tracks by the current artist continues after current track. – plays the current track continuously – repeats all the tracks (under current Artist, Genre or Album) – repeats all the tracks (under current artist, genre or album) in random order – tracks (under current artist, genre or album) are played in random order 6.2.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 24 6.HD(Located on Center) English On the source unit (Center or Station) where music is playing: 6.5 Viewing track information 1 Press VIEW on the remote control once or more times to enter the playback screen.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 25 4 6.6.2 MUSIC BROADCAST MUSIC BROADCAST allows you to broadcast music from Center to Stations. To stop MUSIC BROADCAST, press STOPÇ on the Center Helpful hints: – To exit MUSIC BROADCAST on a Station, press STOPÇ on the Station.To broadcast music to the Station again, press STOPÇ on the Center, and then activate MUSIC BROADCAST on the Center again.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 26 7. FM radio English 7.1 Tuning to radio stations 7.2 Storing preset radio stations 1 Connect the supplied FM wire antenna to the Station (see Installation) You can store up to 60 preset radio stations in the memory. 2 Check that the set is switched on or in standby mode (see Basic functions) 7.2.1 Autostore: automatic programming 3 Press SOURCE once or more times to select Radio ➜ Playback screen appears.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 27 3 4 On the Station, press 3 or 4 or the Numeric Keypad (0-9) to select your desired preset number. 7.4 NEWS You can activate NEWS while listening to HD, USB, UPnP, or AUX source on WAS7000.The set will tune to the news radio station if the related signals are received from a RDS station. Press OK ➜ Current radio station is stored to that preset location. 7.4.1 Activating NEWS ● OK 7.2.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 28 8. External sources English 8.1 Playing USB mass storage device You can playback music from a USB mass storage device on the Station. 8.1.1 About the USB device Compatible USB mass storage devices: The following devices can be used on the Station: How to transfer music files from your PC to a USB mass storage device You can easily transfer your favorite music from your PC to a USB mass storage device just by dragging and dropping your music files.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 29 8. External sources 1 Check that the USB device is properly connected to the Station (see Installation: Connecting a USB mass storage device ) 2 Press SOURCE once or more times to select USB ➜ The icon appears – No USB Device Present appears if the USB device is not supported by the Station – File system not supported appears if unsupported file formats are used on the USB device 4 External hard disk audio player: a.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 30 9. UPnP 9.3.1 Playing music from the UPnP English 9.1 About UPnP* (Universal Plug and Play) The music collection on the UPnP-enabled device can be played on the Station, wirelessly or through an Ethernet cable (supplied). *Universal Plug and Play (UPnPTM) builds on standard networking technologies and provides standardized protocols for a wide variety of home and small business devices.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 31 English 10. Sleep 10.1 SLEEP You can preset a certain period of time after which the Station will switch to standby mode.. 1 On the remote control, press SLEEP repeatedly to select the desired time period (in minutes): ➜ The display shows in sequence: Sleep 15, 30, 45, 60, 90, 120, Off. ➜ Display shows the selected option briefly and returns to its previous status.The icon ZZ appears.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 32 11.Alarm English 11.1 Setting alarm 11.1.2 Setting repeat mode 1 IMPORTANT! Before setting the alarm, check that the clock setting is correct. To set repeat mode for the alarm sound. a. In the alarm setting menu, press 3 or 4 and 2 to select Repeat. 11.1.1 Setting alarm time 1 Enter the alarm setting menu a. Press MENU b. Use the navigation controls 3 or 4 and 2 to select Settings followed by Alarm 2 To turn on the alarm a.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 33 12. Network setting On the Center 4 Up to 5 Stations can be connected to the WAC7000 Center.When adding a Station to the Center’s Wi-Fi network, you can play the Center’s music library on the Station or move music playback between the Center and Stations (see HD). To add a Station to the Center’s Wi-Fi network, proceed as follows: Press STOPÇ when all the Stations are found. 12.1.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 34 12. Network setting English 12.2 Connecting to external WiFi network 5 Helpful hint: You can also select Static and assign an IP address as prompted using the alphanumeric keys. The external Wi-Fi network can be a single PC or a PC network For music playback within the external network, see UPnP: UPnP playback. 12.2.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 35 12. Network setting The external wired network can be a single PC, a PC network, or a Station The Station can access the wired and wireless network at the same time. Using the supplied Ethernet cable, you can connect the a Station separately to a wired network while maintaining its Wi-Fi connection (e.g. the Wi-Fi connection between the Center and Stations or the Wi-Fi connection with an external network).
pg001-041_was7000_97 2006.12.14 1:38 PM 12. Network setting English 12.4 Viewing connection status 12.4.1 Viewing the connection with external network 1 2 Check that the Station is in HD source 3 Press the navigation controls 3 or 4 and 2 to select WiFi or Ethernet ➜ The display shows: In Wi-Fi: information about the Wi-Fi settings on the set. In Ethernet: information about the Ethernet settings on the set. 36 Select Information on the Station a. Press MENU to enter the menu screen b.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 37 13. Reset English 13.1 Reset If desired, you can restore the Station to their default settings (including the network settings). When to reset the Station: – Resetting the Station helps to re-establish the Wi-Fi connection between the Center and Station. – Change the way the Station connects to an external Wi-Fi/wired network. 1 Check that the set is switched on (see Basic functions).
pg001-041_was7000_97 2006.12.14 1:38 PM Page 38 14. Firmware Upgrade English 14.1 Firmware upgrade You can upgrade your WAS7000 Station with the supplied PC Installer CD Wireless Audio Device Manager (WADM). 1 2 Register your WAS7000 on www.club.philips.com Download the firmware upgrade file and store it on your PC 3 4 Connect your WAS7000 to power supply Connect your WAS7000 to PC via the supplied ethernet cable 5 Install and launch WADM.The PC shows as below: 6 Click Device Configuration.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 39 WARNING Never try to repair the system yourself as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to resolve a problem by following these hints, consult your dealer or Philips for help. Problem During the first-time setup, the display on the Station shows “Searching for Center”.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 40 15.Troubleshooting English Problem 40 Solution Stations react when you operate the Center’s remote control ✔ The remote control for the Center is powerful enough to operate several Stations within a certain distance or angle. Check that you have placed the Stations in different rooms or place them at different angles ✔ Use the remote control for the Station or the controls on the set.
pg001-041_was7000_97 2006.12.14 1:38 PM Page 41 16.Appendix IMPORTANT! – The wall mounting instructions are for the use of the qualified wall mounting person only! – Ask a qualified person to help you with the wall mounting, which includes drilling holes on the wall, fixing the mounting brackets to the wall, and mounting the sets onto the brackets. 16.1.3 Mounting your Station English 16.1 How to mount your Station onto wall 1 Align the bracket in the chosen location on a wall.
Meet Philips at the Internet http://www.philips.com Need help? Online Go to www.philips.com/support WAS 7000 CLASS 1 LASER PRODUCT 3141 075 21711 C Royal Philips Electronics N.V. 2006 Printed in China Back Cover_WACS7000 PDCC-2006 2006.11.
