User manual

Using the appliance
Setting the alarm
When you set the alarm, you choose the light intensity level, the type of sound and the sound level.
The alarm is set when the light ring round the ALARM button is on. The light intensity slowly
increases to the chosen level during the last 30 minutes before the set alarm time. The sound slowly
increases in 90 seconds to the chosen level after the set alarm time.
Setting the alarm time
1 Pressthealarmtimebutton(*)tosetthealarm.(Fig.9)
Thealarmtimestartsashingandtwoarrowsappearaboveandbelowthealarm
time(Fig.10).
2 Use the %andthe^buttonstosetthealarmtime,i.e.thetimeatwhichyouwishtoget
up.(Fig.11)
3 Pressthebuttonlongertoputthetimeforwardorbackwardmorequickly.
4 Pressthealarmtimebutton(*)againtoconrmthealarmtime.(Fig.9)
Thearrowsdisappearandthealarmtimestopsashing.
Note: If you do not conrm the alarm time, the ashing stops after 10 seconds. This means that the
alarm time has been set.
Setting the sound and the sound level
1 PresstheALARMbutton(Fig.12).
ThelightringroundtheALARMbuttongoeson(Fig.13).
Therstsoundsymbol(radio)ashesfor3secondsandthesoundcanbeheard.
2 PresstheALARMbuttonagainifyouwanttoselectanotherwake-upsound.Whenyouhave
foundthesoundyouwanttouse,donotpresstheALARMbuttonagain(Fig.12).
After3seconds,thesymbolofthesoundselectedstopsashingtoindicatethatithasbeen
selected.
Thealarmhasbeensetandcontinuestoworkuntilyouswitchoffthealarmfunction.When
youdothis,thesoundsymboldisappearsfromthedisplayandthelightringroundthe
ALARMbuttongoesout.Seealsosection‘Switchingthealarmonoroff’.
3 Turnthevolumecontrolwheel$tosetthesoundlevel.(Fig.14)
The $appearsonthedisplay.(Fig.15)
4 Ifyouwantnosoundatwake-uptime,selectlevel0.
Setting the light intensity level
1 Usethelightadjustmentwheel@tosetthelightintensitylevel.(Fig.16)
The @appearsonthedisplay.
Tip: When you use the appliance for the rst time, set the light intensity to 20. The moment you wake up,
check which light intensity level the appliance has reached by slightly turning the light adjustment wheel
@. When you do this, the current alarm light intensity level appears on the display. Set the alarm light
intensity to this level for the next day.
2 Ifyoudonotwantthelighttogoonatwake-uptime,selectlightintensitylevel0.
Quick alarm check
1 PresstheQUICKCHECKbuttontostartanacceleratedwake-upalarmtest(Fig.17).
ThelightringroundtheQUICKCHECKbuttongoeson(Fig.18).
,
,
,
,
,
,
,
,
,
ENGLISH 9