User manual

Duringtherst50secondsofthetest,youseearapidincreaseofthelightintensitytothe
selectedlevel.Duringthelast40seconds,youheartheselectedsoundgraduallyincreaseto
theselectedlevel.
2 PresstheQUICKCHECKbuttonagaintostopthetest(Fig.17).
ThelightringroundtheQUICKCHECKbuttongoesout.
Note: The appliance continues to run the accelerated wake-up alarm test until you press the QUICK
CHECK button again.
Switching the alarm on or off
The light ring round the ALARM button is on when the alarm is on. At the set time, the wake-up
sound is played and the lamp has reached the selected light intensity level.
1 Press the 3buttontoswitchoffthelightandthewake-upsound.(Fig.19)
ThelightringroundtheALARMbuttoncontinuestoburn.Thealarmfunctionisstillactive
andthewake-upalarmwillgooffatthesettimeandwiththesetsoundandlightintensity
thenextday(Fig.13).
2 Press the #buttonifyouwanttoswitchoffthesoundwhenthealarmgoesoff.(Fig.20)
3 Press the @&buttonifyouwanttoswitchoffthelampwhenthealarmgoesoff.(Fig.21)
4 Ifyouwanttoswitchoffthealarmfunctionaltogether,presstheALARMbuttononeor
moretimesuntilthereisnosoundsymbolonthedisplayandthelightringroundthe
ALARMbuttongoesout.
Snoozing
1 PresstheSNOOZE/SCREENBRIGHTNESSCONTROLbuttontoswitchoffthesoundfor9
minuteswhenthealarmhasgoneoff(Fig.22).
The lamp continues to burn at the selected intensity level. After 9 minutes, the wake-up sound is
automatically played again.
2 PresstheSNOOZE/SCREENBRIGHTNESSCONTROLbuttonlongertodimthelight.
Note: You can only do this once. After you release the button, it functions as SCREEN BRIGHTNESS
CONTROL button again.
Note: You can only use the snooze function within 15 minutes after the alarm starts to go off. After those
15 minutes, the button no longer functions as SNOOZE button and only functions as
SCREEN BRIGHTNESS CONTROL button.
Adjusting the light intensity during the wake-up phase
1 Turnthelightadjustmentwheel@toselectahigherorlowerlightintensity.(Fig.16)
The lamp burns at the selected intensity during the rest of the wake-up phase.
Adjusting the brightness of the display
1 PresstheSNOOZE/SCREENBRIGHTNESSCONTROLbuttontoadjustthebrightnessof
thedisplay(Fig.22).
Press the button again to set the brightness to another level. There are three levels.
Note: This button cannot be used to adjust the display brightness when the alarm goes off and during
snoozing.
3 button
1 Whenthealarmgoesoffatthesetwake-uptime,pressthe3 button to switch off the
wake-upalarmlightandsound.
,
,
,
ENGLISH10