System information

Prepare
22
4.1.1 View the clock
Press & hold VIEW button for about 5 seconds.
> The clock will appear briefly in the display.
Tip
• In Standby mode, you can briefly press View to turn on the LCD backlights and view clock
more clearly.
• If you disconnect the power supply (pull the mains plug), the clock will be reset (settings will
not be saved).
4.2 Remote control
Center is supplied with a remote control.
4.2.1 Remote control battery installation
Caution!
To avoid the risk of explosion:
• Do not puncture, cut, or manipulate batteries in any way and do not throw them into the fire.
• Do not short-circuit the battery terminals.
To avoid burn injuries:
• Wear protective gloves when you handle leaking batteries.
To avoid leakage of corrosive battery fluid and damage to the product:
• Always replace all batteries at the same time
• Do not mix old and new batteries or batteries of different types.
• Replace batteries immediately if they are exhausted.
• Always remove the batteries, if the remote control will not be used for a longer period of
time.
To avoid batteries being accidentally swallowed:
• Always keep them out of reach of children and pets. (Consult a physician immediately, if a
battery has been swallowed!)
Important!
• Always point the remote control directly towards the IR sensor on Center.
• First, select the source you wish to control by pressing one of the source select keys on the
remote control (for example MP3-CD/CD, HD, FM TUNER,AUX).Then select the desired
function (for example 2/; / J( / )K ).
1
Downloaded From Disc-Player.com Philips Manuals