Quick start guide

1
3
2
6
After you power up WACS700, the WiFi connection will start automatically
between WAC700 Center and WAS 700 Station.
A
Set up Wi-Fi connection between Center and Station
The first time you set up the Wi-Fi connection, place
WAC700 Center and WAS700 Station side by side
on a flat and firm surface.
Connect WACS700 to power supply, first the Center
and then the Station
Center/Station: • The screen lights up.
Auto installation/connection starts.
• You will enter HD (Harddisk) mode
when the installation/connection
is finished.
Relocate Center and Station as desired: plug and stream
• Simply unplug your Center or Station and power them up
in different rooms.
• You will be able to move the harddisk music between
Center and Station.
IMPORTANT!
• Avoid thick walls. Your Center and Station should never be blocked by 2 or more walls.
• Keep your Center and Station away from the source of interference, for example: plasma TVs, microwave
ovens, DECT phones, bluetooth devices, cordless phones, other Wi-Fi products.
• Adjust the location of your Center and Station according to the reception status of Wi-Fi signals
: indicates maximum reception; : indicates minimum reception
• For wall mounting, you need to ask for help from the qualified person. For details, see User Manual,
Appendix: How to mount your Center and Station onto walls.
Plug & stream
• Make sure you have powered up Center before powering up Station.
Connect/Setup
After you power up WACS700, the Wi-Fi connection will start automatically
between WAC700 Center and WAS700 Station.
Center
Station
AC
AC
QUG-Eng 2005.6.29 15:07 Page 3