Firmware-Upgrade Software

4. Write the extracted files – not the zip file – onto a blank CD-R or CD-RW
disc, using the following settings:
• File System CD-ROM Joliet
• File name length : max 31 chars (ISO Level 2)
• Mode : 2/XA
• Character set : ASCII
• Single sessionWrite Speed : Low
• Finalized the disc. (The application may do this automatically.)
(Note: Make sure you finalize the CD)
ii) Upgrade WACS5
Upgrade WAC5 Center:
1. Check WAC5 Center is on and WAS5 Station is off
2. On Center, insert the upgrading CD into the CD slot loader, with
CD graphic printed side facing you