User Guide

TURBO TIMER-RECORDING ENGLISH
44
44
5 The display shows the programme number to
which the video recorder is currently set,
e.g.: P01. Change  if necessary  the
displayed start time with
==PP--
or
;;PP++..
1 Press the
TTUURRBBOO TTIIMMEERR
button on the
remote control.
TTuurrbboo TTiimmeerr--RReeccoorrddiinngg
2 The display shows the actual starting time,
e.g.: 20:00. Change  if necessary  the
displayed start time with
==PP--
or
;;PP++
FFOORR
EEXXPPEERRTTSS
AAccttiivvaattee VVPPSS//PPDDCC
VPS (Video Programming Service) and PDC signals
(Programme Delivery Control) are transmitted by TV
channels at the start and end of transmissions and
ensure that programmes will be completely recorded,
even if they are rescheduled. Use
SSEELLEECCTT
to switch
recognition of these signals on (VPS/PDC appears in
the display) or off.
3 Confirm with
OOKK
4 The display shows a suggestion for the end of
the recording e.g.: 22:00 (Start time + 2
hours). Change  if necessary  the displayed
start time with
==PP--
or
;;PP++..
Confirm with
OOKK
P01
ST17: 30
EN19: 30
Using the Turbo Timer, you can make a programmed recording
within the next 24 hours quickly and simply,without having to switch
on the TV set. All you need to do now is enter or confirm the
desired programme number and start and finish time in the video
recorder.
6 Confirm with the
TTUURRBBOO TTIIMMEERR
button.
The display briefly shows OK.