Contestable Safety Precautions Getting Started WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TG RAIN OR MOISTURE. *The POWER button does not completely shut off the mains power from the unit, but switches operating current on or off only. »The rating plate is on the rear of the unit. Introduction Congratulations on purchasing your new VCR (Video Cassette Recorder). i is one of the most sophisticated yet simple-to-use home video recorders you can buy.
Description of Controls 3 VCR Display Panel Front Panel 1 2 § 121110 POWER Button Press to turn the VCR (Video Cassette Recorder) on or off. To set the VCR. for unattended recordings after timer settings have been completed. 2 Cassette Compartment Where the video cassette is inserted. 3 STOP/EJECT Button Press to stop the tape, Tress again after the tape has stopped to eject the cassette, 4 PLAY Button » Press to play back a tape. * Pres to release the Slow or Search mode and return to playback.
Rear Panel 363 3332 28 AC (Alternating Current) Power Cord Connect to a household outlet, 29 VIDEO IN(put) Jack For video input connection from the output jack of & portable video camera, another VCR, or another video source. 30 AUDIO IN(put) Jacks For audit input connection from the output jack of a portable video camera, another VCR, or another audio source. 31 Antenna) IN(put) Jack {in from Antenna) Connect your antenna o cable to this terminal.
Description of Controls (cont'd) 5 Remote Control Transmitter 315 920 282 PHILIPS 9 PLAY/A Button * Press to play back a tape, « Press to release the Slow or Search mode and term to playback, * Press 1o move up the cursor during on-screen mien setting. 10 Button « Press to rewind the tape at high speed. Also, during playback, press this bunion to view the picture in rapid reverse visual search, « Press to go back to previous serene during on-screen menu setting, 11 STOP/v Bunion * Press to stop the tape.
BeforeUsingYourVCR 1 Load The Batteries as Follows: 1 Remove the Battery Compartment | 2 Install Iwo batteries according to polarity | 3 Replace the lid. 1id from the bottom of the remote indicated inside the Battery Compartment. control. oY Bottom of Remote Control Battery Replacement Caution « Do not mix old and new batteries. (Also never mix alkaline batteries with manganese batteries.) w This remote cant sol and batteries are supplied accessories. Please check fo make sear they are included.
1 JULIETTE Step 12 Disconnect the Antenna or Cable from Your TV. Indoor Antenna o Outdoor Antenna ¢ ol S Step 2% Connect Your Antenna or Cable to Your VCR. Cable ANT. 1Y Back of VCR {in from Antenna) Quito TV Step 3: Connect Your VCR to Your TV. Bath ends of the black R cable are the Antenna or Cable [RISE | same. Plug either ond into the VCR. Now, ‘plug the other end into the TV. AC Power Cord Back of VCR : ANT. 1N v 200w Otto Coaxial Cable {supplied) (Continued on next page.
§ _Getting Connected Up o) Solicit Gillian 3.1 Set the CHANCY switch on the back of the YCR fo channel Back of VCR operate the VCR with your TV, set your TV o the same channel, For example, i your switch is set fo channel 3 (CH, tum your TV to channel 3. ‘ "To avoid Local interference, the CH3/CR4 switch position you i £, choose should correspond to the Local TV channel that is not AC g used or feast used.
. Setting the Clock 9 ‘s set your VCR o the present day and time, follow steps 1 —4 below, Nee set, your VCR {Video Cassette Recorder) will maintain the time in its internal clock, and will duke timer recording possible. EXIT/ M Make sure .. STATUS + your VCR and TV are connected and muted on, Button « the VCR indicator says “VCR™. * to make each entry within 10 seconds, otherwise the VCR will exit the Clack Set mode and you will have to start over. CURSOR Press the MENU button.
Be-Setting Your VCR’s Tuner To place receivable channels in your VCR (Video Cassette Recorder), follow steps 13 below. This function Tet you e program your VCR's tuner at any time, With the Add/Delete feature you can add or delete any channel. You must use your remote control.
To play a tape, follow sips 1 -4 below. v . l Turn TV on. ‘ Select channel 3 or 4. Cassette Tape yoR the batteries are loaded in the remote control and the connections on page 7 have been completed before continuing 1o the steps below, Shutting Ring—— (REW (ind}) PLAY Button| Re Wind) " STOP Button Remote Control Turn the TV op. Sef the TV to the same channel a5 the switch on the ‘back of the VCR (CH3/CH4). At the VCR Insert 2 cassetie.® « The VCR Power will come on. BIE LT Press the PLAY button.
RecordonaTape o record on a cassette tape, follow steps 1 —7 below. Read all the instructions before staring. You nuts use your remote control. Make sure the steps in “Meting Connected Up” on page 7 have been completed. Tum the TV on. Tom fo channel 3 if the VCR CH3/CH4 switch is set 90 “CH” Turn to channel 4 if the VCR s set the YCR Insert & cassette with the record (ab in place. The owes will come on.
o record one channel while viewing another, follow steps 1 ~ 4 below. Please read all the instructions. You must use your remote control. Start a Recording Start 2 recording as described on page 11, Set the VCR/TY Button Press the VCR/T'V button to select the TV mode. The VCR indicator disappears. MR EER Bl U TR Select the channel to be viewed at the TV, using the channel controls on the TV or TV remote contra. The channel selected with the TV camel controls appears on the TV screen.
On-Screen Displays (OSD) 0SD Main Menu Screen Press the MENU button on the remote control to display the main menu screen. Then press A or V' button on the remote control for the desired feature displayed on the menu, When you select a feature, tum to the section In this manual and read the accompanying instructions. VCR Status Display Main Menu 1. Press the MENU button. 2. Next,press A or V¥ button to select “VCR SET UP” and then press > button. 3.
Touch Recording (OTR) 15 rro settee VCR (Video Cassette Recorder) to automatically shut off after recording is completed, follow steps 1-3 below. OTR lets you quickly specify how long you want recording to continent, You don't have to program the timer with this function. QTR Indicator STOP Button VCR « the steps in “Getting Connected Up™ are done, channels are programmed into the VCR’s memory, and the TV and VCR are ‘both turned on. « the clock is set w the correct time.
Timer Recording record while you're away, follow steps 112 below. For cache program you set, the VCR will tum itself on, do the recording, and um off automatically. You can store up fo eight programs, Instructions for each step appear on the TV screen after you begin. You must use your remote control, Make sure + the steps in “Gatling Connected Up” have been » the clock is set to the correct tme.
B e First, press two NUMBER buttons for the hour, ) Next, press two NUMBER buttons for the REG Sl minute. Now, press NUMBER button “1” for for PM. ToE BT For example, for 9:30 PM, press NUMBER bunions Select the “TIME OFF” Flutist, press two NUMBER buttons for the hour, Nix, press fwo NUMBER buttons for the minute. For example, for 10:00 PM, press 2. Select the Recording Speed Press the 1 or 2 Patton to choose SP (Standard s o Play) or SLP {Super Long Play).
.Special Playback Features Is your VCR (Video Cassette Recorder) connected to your TV (see “Getting Connected Up”}? Are you familiars with tape. playback (see “Play a Tape™)? If so, you are ready to enjoy the spectral playback features described on this page. These features work best in the SP (Standard Play) or SLP (Super Long Play) mode. You must use your remote control, To Rapidly Locate a Particular Segment First, press the PLAY button. Next, prods the or FF (Fast button.
_Special Playback Features (cont’d) 19 POWER Button CURSOR (Av< ) Buttons I—— TRACKING UP/DOWN Butters Remote Control Manual Tracking Controls Press the TRACKING UP/DOWN buttons, Use Manual Tracking adjustment during Playback, slow motion, and double speed playback to minimize noise in the picture.
Re-R ling (Tape Duplication) Dubbing from any VHS recorder (or camcorder) to another is simple. Just use the connections and steps below. The ‘example below uses two VCR like this one, Other VARS may operate differently. CONNECTIONS 1 Insert a per-recorded gape. VOR 1 s the VCR (Video Cassette Recorder) that will play your tape. If the record tab is missing {page 8), playback starts, Tn that case, press the stop bunion. Source Camcorder ] Player Insert a blank tape in the editing VCR.
ion 21 Tape Counter Control Sl REW ) Button —EXIT/ STATUS Button GLARE Button Memory} Button Remote Control Go-To Function select the tape counter display, press the. STATUETTES button, The tape counter display appears on the TV screen, 12845 Reset the Tape Counter To reset the tape counter, press the CLEAR. ‘bunion. You can reset the curter 10 zero at ‘whatever point on the tape you choose. scan NORRIS “To select the memory function, press the Memory) button.
phototypesetting E 7 "our resole control may be able to operate the basic factions of your television. In addition to PHILIPS televisions, other manufacturer’s televisions Hated below can also be controlled by setting the remote control to the corresponding TV code. Initially, the code amber is set to 01, TV POWER Button Try Your Remote Control Point this remote control at your remote controllable TV and fry the TV POWER button.
Your VCR remote control can save you ail that Rooking by automatically signaling its location to you. g MUTE Burton |PAUSE/STILL Button y 1 CURSOR Buttons — MENU Button NUMBER Buttons Remote Control « The remote locator may not properly receive its “homing” signal from the VCR if it has been placed on metal sheaf or counter material.
{Multi-Channel Television Sound) i ) our VCR (Video Cassette Recorder) can record and play back a Second Audio Program (SAF} or TV stereo when received as an MTS broadest, MTS Recording and Playback By hooking-up to a stereo amplifier and speakers, you can enjoy MTS broadcasts. You can select the type of broadcast and sound track you wish to record or play back using steps 1 —4 below Make sure... « an antenna or cable system is connected to the. VCR (page 7). « cassette is inserted (page 10).
___VHS Hi-F Stereo Sound System 25 en an MTS program is broadest in Hi-F stereo, it will automatically be recorded in Hi-F stereo. To play back, just be sure the settings Shawn i the TUNER SET UP and AUDIO OUT menus are displayed like those below. With these settings, you can play back stereo programs in Hi-F audio.
Nonoperational Connecting Up Your VCR « 1f the reception on afl chancels s unsatisfactory, you may need to re-tune your TV set. Clock Adjustment * In the Clock Adjustment mode, be sure to enter the fists digit and all subsequent entries within 10 seconds of one another. Otherwise, the VCR will automatically leave this made and the program you were walking will return to the screen. If this happens, press the MENU button and start again. + Be sure to enter "0" before single-digit numbers.
_ Before Requesting Service 27 IMPORTANT NOTE: Periodic maintenance is required in order to maintain the unit’s continued excellent performance. Afters period of time the Video beads will require replacement. If cleaning o replacement of the Video heads is required, this service should be performed by an authorized Video Oyster Service Center.
Before Requesting Service (cont'd) r—Remote Control Correction VCR can't be remote controlled. +--Miscellaneous + Aim the Remote Control directly af the remote sensor on the VCR. « Avoid all obstacles which may interferes with the signal path, » Inspect or replace the batteries (P6), « Make sure batteries are inserted comely (P6). Correction: “You can’t view programs nominally on the TV.. Video cassette can’t be inserted... Video cassette can’t be removed...
THE BEST CHOICE FOR YOUR VIDEO CASSETTE RECORDER || PHILIPS Philips offers a full range of High Grade & Extra High Grade Video Cassettes.
