User Guide

How to check or change a programmed
recording (TIMER)
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMER k button on the remote control.
The programming mode selected last is marked.
c Select the line ’TIMER LIST’ with the P = or ;P
button and confirm with the P button.
d Select the programmed recording (TIMER) you want to
check or change with the ;P or P = button.
e Press the P button.
f Select the entry field with the Q or P button.
g Change any information with the P = or ;P button or
with the 0-9 buttons.
DUnder ’END’, use the SELECT button to select the
recording speed ’SP’ or ’LP’.
h Confirm with the OK button.
i To end, press the TIMER k button.
j Make sure that the cassette you have put in can be
recorded on. Switch off with the STANDBY m button.
DThe programmed recording will only function when
the video recorder is switched off with the
STANDBY m button.
How to clear a programmed recording
(TIMER)
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMER k button on the remote control.
The programming mode selected last is marked.
c Select the line ’TIMER LIST’ with the P = or ;P
button and confirm with the P button.
d Select the programmed recording (TIMER) you want to
clear with the P = or ;P button.
e Press the CLEAR (CL) button.
f Confirm with the OK button.
g To end, press the TIMER k button.
’NexTView Link’
This video recorder is equipped with the function ’NexTView
Link’. If your television is also equiped with this function, you
can mark TV programmes on the television for programming.
These TV programmes will automatically be transmitted to a
TIMER block on the video recorder. If you clear the marking of
the TV programme on the television, the corresponding TIMER
block on the video recorder will also be cleared.
For more information, read the instruction manual of your TV
set.
23