User Guide

— 40 —
Correction
• Insert the cassette with the window side up and the record
tab facing you.
• Check that a cassette tape is not already inserted. Press
STOP/EJECT 0.
• Make sure the AC power cord is correctly connected to
an AC outlet.
• If the
(Timer) indicator is lit on the display, press
POWER or STANDBY/ON to cancel timer recording,
then press STOP/EJECT 0.
• Make sure the record tab on the back of the cassette is not
removed. (✈P.22)
Miscellaneous
A cassette cannot be inserted.
The cassette does not eject.
The cassette ejects when you press REC/OTR¶ , or when
you press POWER or STANDBY/ON to set timer
recording.
General
Mains voltage AC 220 V – 240 V
Mains frequency 50 Hz/60 Hz
Power consumption
Power On 23 watts
Power Off 5.2 watts
Power Save Mode 3 watts
Ambient temperature +5°C to +40°C
Relative humidity 10% to 80%
Dimensions Approx. 435(W) x 94(H) x 343(D) mm
Mass Approx. 4.7kg
Position for use Horizontal
Video output channel UHF E36 (adjustable between 22 — 69)
Possible number of TV channel 99
Number of pre-programmable memory blocks 8
Number of days in advance 365 or every day, or every week
Tuner
Aerial input B/G, D/K
VHF L: 47 MHz — 89 MHz
VHF H: 104 MHz — 300 MHz
302 MHz — 470 MHz
UHF: 470 MHz — 862 MHz
CATV
Video
Input (VIDEO IN) 0.5 V(p-p) to 2.0 V(p-p), 75 ohms
Output (VIDEO OUT) 1.0V(p-p) ± 0.2 V(p-p), 75 ohms
Resolution 250 lines (VHS)
400 lines (S-VHS)
Signal/noise ratio Better than 45 dB
Audio
Input (AUDIO IN) –8 dBs, 50k ohms (0dBs=0.775 Vrms) – for RCA connector
–8 dBs, 10k ohms (0dBs=0.775 Vrms) – for SCART connector
Output (AUDIO OUT) –8 dBs, 1k ohms (0dBs=0.775 Vrms)
Accessories supplied Remote control unit
RF coaxial cable
Design and specifications are subject to change without notice. Batteries – R6(SUM-3)/AA
S PECIFICATIONS
B EFORE R EQUESTING S ERVICE (CONTINUED)
Untitled-2 16/08/2000, 15:3940