User Guide
— 3 —
D
ESCRIPTION
OF
C
ONTROLS
Front Panel
11 VIDEO input jack
For connecting to the video output jack
on another VCR or a portable video
camera. (✈P.33)
12 AUDIO input jacks
For connecting to the audio output jacks
on another VCR or a portable video
camera. (✈P.33)
13 AUDIO DUBBING button
Replaces the normal audio sound of a
previously recorded tape with a new
soundtrack, using an audio component
(✈P.34)
14 Display window
See page 7.
15 IR (infrared) remote sensor
Receives the signal from the (IR) remote
control.
16 PROGRAMME 5 / ∞ buttons
• Changes the channels on the VCR.
Release at a desired channel.
• Moves the cursor up and down when
using the menus. (✈P.16)
• Adjusts the tracking during playback,
still picture and slow motion picture
(✈P.23)
17 PAUSE/STILL 8 button
Stops the tape during recording (pause)
or playback (still picture). (✈P.21, P.22)
Press again to resume normal recording.
Press PLAY 3 to resume normal
playback.
Activates slow motion picture when
pressed for more than 2 seconds during
playback. (✈P.23)
18 PLAY 3 button
Starts normal playback. (✈P.21)
19 Jog dial
Advances or reverses the picture frame
by frame in the still picture mode
(✈P.23)
1 STANDBY/ON button
• Turns the VCR on or off.
• Sets the VCR for an unattended
recording (timer recording) after
timer settings are completed. (P.29)
(P.30)
2 S-VHS ET button
Selects S-VHS ET recording mode
when pressed. The lamp (the button
itself) will lit. (P.28)
3 DIGITAL TBC/NR button
Removes jitter from fluctuating video to
deliver a stable picture. (P.25)
The lamp (the button itself) will lit.
(P.28)
4 SPEED button
Selects the tape speed for recording (SP
or LP). During playback, the tape speed
is automatically selected (SP, LP or
SLP). (P.22, P.29, P.30)
SP, LP : For PAL signal
SP, SLP : For NTSC signal
5 DISPLAY button
Displays the time counter, present time,
channel number, and tape remaining
time.
6 Cassette compartment
Where a video cassette is inserted.
7 REC/OTR ¶ button
• Starts recording when pressed once.
(P.22)
• Starts a recording for 30 minutes to
6 hours long when pressed more than
once. The shut-off time increases in
30 minute intervals. (P.26)
8 STOP/EJECT 7 / 0 button
Stops the tape when the tape is running.
(P.21, P.22)
Press again to eject the cassette when
the tape is not running. (P.21, P.22)
9 SHUTTLE ring
• Rewinds or fast forwards the tape
when the tape is not running. (✈P.23)
• Starts reverse or forward rapid visual
search during playback or still
picture mode. (✈P. 21, P.23)
10 S-VIDEO input jack
For connecting to the S-
Video output jack on another VCR or a
portable video camera. (✈P.33)
@
F
O
R
W
A
R
D
R
E
W
I
N
D
REC/OTR
DISPLAY
AUDIO DUBBING
S-VHS ET
SPEED
STANBY/ON
DIGITAL TBC/NR
VR 1000 VIDEO CASSETTE RECORDER
PROGRAMME
PLAYPAUSE/STILL
STOP/EJECT
+8
4
0
6
-
15
dB
NORM
12
SP SLP
VCR
OPEN AV FRONT CONNECTORS
/
625
VPS/PDC
REVIEW
1
23
6
8
4
5
7
9
10
VIDEO
OPEN
L AUDIO R
Open the lid
S-VIDEO
11 12
13
14
16
17
18
19
15
DIGITAL STEREO
TURBO
DRIVE
625
Untitled-2 16/08/2000, 15:333










