User Guide

— 32 —
Correction
• Aim the remote control directly at the remote sensor on
the VCR.
• Avoid all obstacles which may interfere with the signal
path.
• Inspect or replace the batteries. (✈P.5)
• Make sure batteries are inserted correctly. (✈P.5)
Correction
• Insert the cassette with the window side up and the
record tab facing you.
• Check that a cassette tape is not already inserted. Press
EJECT .
• Check that the AC power cord is correctly connected to
an AC outlet.
• Check that the record tab on the back of the cassette is
not removed. (✈P.12)
Remote Control
The remote control cannot work.
Miscellaneous
A cassette cannot be inserted.
The cassette does not eject.
The cassette ejects when you press REC/OTR, or when
you press POWER to set timer recording.
General
Mains voltage AC 110 V – 240 V
Mains frequency 50 Hz/60 Hz
Power consumption Approx. 19 watts
Ambient temperature +5 °C to +40 °C
Relative humidity 10 % to 80 %
Dimensions (WxHxD) Approx. 360 mm x 94 mm x 277 mm
Mass Approx. 3.2 kg
Position for use Horizontal
Video output channel UHF 38 (adjustable between 28 — 60)
Possible number of TV channel 99
Number of pre-programmable memory blocks 8
Number of days in advance 365 or every day, or every week
Tuner
Aerial input B/G, D/K, I, K1
VHF L: 42 MHz — 175 MHz
VHF H: 175 MHz — 470 MHz
UHF: 470 MHz — 870 MHz
CATV
Video
Input (VIDEO IN) 0.5 V(p-p) to 2.0 V(p-p), 75 ohms
Output (VIDEO OUT) 1.0 V(p-p) ±0.2 V(p-p), 75 ohms
Resolution Better than 240 lines
Signal/noise ratio Better than 43 dB
Audio
Input (AUDIO IN) –8 dBs, 50 k ohms (0 dBs=0.775 Vrms)
Output (AUDIO OUT) –8 dBs, 1 k ohms (0 dBs=0.775 Vrms)
Accessories supplied Remote control unit
RF coaxial cable
Batteries – R6(SUM-3)/AA (only for checking operations)
S PECIFICATIONS
B EFORE R EQUESTING S ERVICE (CONTINUED)
vr1010/75 00.6.29, 4:54 PM32