User Guide

— 28 —
LP 20917-003
VHF/UHF
IN
ANT.
OUT
TV
VIDEO
L
R
AUDIO
(MONO)
OUT
IN
INOUT
S-VIDEO
LP 20917-003
VHF/UHF
IN
ANT.
OUT
TV
VIDEO
L
R
AUDIO
(MONO)
OUT
IN
INOUT
S-VIDEO
Tape Duplication
1 Connect the recording VCR (this VCR) and the playing
VCR.
2 Connect the recording VCR (this VCR) to the TV.
Connection
Diagram
Dubbing from any VHS VCR (or video
camera) to another is simple.
Explanations on this page uses this
VCR as the recording VCR.
Refer also to the manual supplied with
the other VCR (for playback).
You can also use the AUDIO/VIDEO
input jacks on the front panel to
connect another VCR or video camera
using the audio/video cable (RCA pin-
type).
Recording VCR (this VCR)
1At VCRs
Insert a source tape in the playing VCR
and a blank tape in the recording VCR.
• If a tape without the record tab is inserted
in the playing VCR, playback automati-
cally starts. In this case, press the STOP
button.
2At TV
Turn the channel on the TV to your
video channel.
3Select Line Input
Press CH or , pointing the remote
control at this VCR, to select the
external line input.
• For rear jacks, select “L-1” on the
display or “A/V IN ” on the TV
screen.
• For front jacks, select “L-F” on the
display or “F- A/V IN ” on the TV
screen.
Playing VCR
4Select Tape Speed
Press ALT/SPEED, pointing the
remote control at this VCR, until the
desired tape speed (SP, LP or SLP)
appears on the display.
SP, LP : For PAL signal
SP, SLP : For NTSC signal
5Play Back Tape
Press the PLAY button on the
playing VCR.
6Record (Copy) Tape
Press REC/OTR a at this VCR.
Remember: press the buttons in steps 5
and 6 simultaneously to avoid missing
any of the recording.
TV
To RF OUT
From Audio output to AUDIO IN
From Video output to VIDEO IN
S-VIDEO OUT to S-VIDEO IN
A DVANCED O PERATIONS (CONTINUED)
vr1010/75 00.6.29, 4:54 PM28