User Guide

— 26 —
A DVANCED O PERATIONS (CONTINUED)
4Select Start Time
Press START + or –
(Number button 1 or 4).
• Each time you press
the button, the set
time changes by 1-
minute intervals. If you hold the button,
the set time changes by 30-minute
intervals.
5Select Stop Time
Press STOP + or –
(Number button 2 or
5).
• Each time you press
the button, the set
time changes by 1 minute intervals. If you
hold the button, the set time changes by
30-minute intervals.
6Select Tape Speed
Press ALT/SPEED.
• Each time you press
the button, the tape
speed alternates
between “SP”, “LP”
and “SLP.”
SP, LP : For PAL signal
SP, SLP : For NTSC signal
7Select Start Date
Press DATE + or –
(Number button 3 or 6).
• The year and day of
the week is displayed
automatically.
8Confirm Programme
Press OK/STATUS or TIMER.
“PROGRAM WAS COMPLETED”
appears on the TV screen.
After 5 seconds, the above message
disappears, and the normal TV picture
resumes. The
(Timer) indicator
lights up on the display.
• If “PROGRAM NOT COMPLETED”
appears, try again from step 1.
• If “PROGRAM OVERLAPPED”
appears, the timer recording you just
programmed overlaps another timer
recording. The Program Review screen
will appear with a magenta line blinking.
To change any item on the overlapping
programs, see page 20.
If you want to store other
programmes, repeat steps 1 to 8.
9Finish Settings
Press POWER to turn off the VCR.
The VCR must be turned off for a timer
recording to take place. If you forget to
turn off the VCR, “PLEASE TURN
OFF VCR FOR TIMER
RECORDING” flashes on your TV
screen two minutes before a timer
recording starts. To remove the
message, press the CLEAR button.
If you want to record the same
programme daily, press DAILY
(Number button 8) during step 3
through 7. (Press the button again to
cancel).
The VCR will record a TV programme
every day (Monday through Friday) at
the same time and length (Daily
Recording).
If you want to record the same
programme weekly, press WEEKLY
(Number button 9) during step 3
through 7. (Press the button again to
cancel).
The VCR will record a TV programme
once a week at the same day, time and
length (Weekly Recording).
After a timer recording has
taken place
Press POWER to turn on the VCR.
You can operate your VCR normally.
To stop a started timer recording
Press POWER.
Recording stops and the VCR turns off.
If it is a Daily or Weekly Recording,
future recordings will be carried out as
programmed.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL+/–
START +/– 08 : 00 PM
STOP +/– 10 : 00 PM
REC SPEED SP
DATE +/– – –/– –/– –
DAILY: 8 WEEKLY: 9
CONFIRM: OK END: TIMER
12
ONE TIME PROGRAM
PROGRAM 1
CHANNEL+/–
START +/– 08 : 00 PM
STOP +/– 10 : 00 PM
REC SPEED LP
DATE +/– – –/– –/– –
DAILY: 8 WEEKLY: 9
CONFIRM: OK END: TIMER
12
ONE TIME PROGRAM
PROGRAM 1
CHANNEL+/–
START +/– 08 : 00 PM
STOP +/– 10 : 00 PM
REC SPEED LP
DATE +/– 14/07/00
FRIDAY
DAILY: 8 WEEKLY: 9
CONFIRM: OK END: TIMER
12
ONE TIME PROGRAM
PROGRAM 1
CHANNEL+/–
START +/– 08 : 00 PM
STOP +/– – –:– – AM
REC SPEED SP
DATE +/– – –/– –/– –
DAILY: 8 WEEKLY: 9
CONFIRM: OK END: TIMER
12
vr1010/75 00.6.29, 4:54 PM26