User Guide

— 24 —
A DVANCED O PERATIONS (CONTINUED)
GUIDE CHANNEL SET UP
GUIDE CH USER CH
254 --
255 01
01 02
02 03
03 04
SELECT: OR 0-9
CONFIRM: OK
END: MENU
1Select G-CODE Mode
1 Press VCR.
2 Press TIMER.
3 Press PLAY or
STOP to select
“G-
CODE/SHOW-
VIEW” then press OK/STATUS.
The
G- CODE entry menu appears on
the TV screen.
(You may notice that the on-screen
display reads " G- CODE /SHOWVIEW
System". Please note that " G- CODE" and
"
SHOWVIEW" are different trademarks
used in different countries to represent the
same easy recording feature. The model
you purchased uses the " G- CODE"
trademark, but the on-screen display uses
both trademarks.)
2Enter G-CODE Number
1 Press Number
buttons to enter the
G- CODE number
assigned to the TV
programme you
want to record.
2 Press OK/STATUS.
• If “ERROR-RE-ENTER CODE” appears
on the TV, you have entered an incorrect
G- CODE number. If this happens, press
CLEAR to erase the number, then enter
the correct number.
• If you have not yet set the user channel,
the “GUIDE CHANNEL SET UP ”
screen will appear. Press PLAY or
STOP buttons repeatedly or number
buttons to enter the USER CH number
which the broadcast for the G- CODE
number is received on the VCR, then
press OK/STATUS.
To be continued on next page
G- CODE
®
Set Up
You can simplify the programming
method of timer recording by using the
G- CODE system. Whenever you want to
record a TV program, all you need to do
is to find out the programme’s
G- CODE
number.
You can easily find out this number by
checking the TV programme list of your
local newspaper or TV guide magazine.
Simply entering the programme’s
G- CODE number using the remote
control will make the VCR record the
programme.
Before using the G- CODE system for the
first time, you need to set the guide
channel number for each local channel
number. The local channel (user
channel) number is the number you
select on the VCR to record a pro-
gramme, while the guide channel
number is the one assigned to that
local channel and you can also find it in
the TV programme list of your local
newspaper or TV guide magazine.
• You can use the tables below to note
your local TV (or Cable) channel
numbers and their guide channel
numbers.
1Select VCR Set Up Mode
1 Press MENU.
2 Press PLAY or
STOP to
select “INITIAL
SET UP” then
press OK/STATUS.
2Set Guide Channels
1 Press PLAY or
STOP to select
“GUIDE CHANN-
EL SET UP” then
press OK/STATUS.
2 While the GUIDE CH number is
flashing, press PLAY or
STOP (or CH / ) or Number
buttons to enter guide channel
number (GUIDE CH) then press OK/
STATUS.
• For example, for guide channel number 9,
press 0, 9.
Always enter “0”
before any single
number entries.
3 While the space for the user CH is
flashing, press PLAY or STOP
(or CH / ) or Number buttons to
enter local channel number (USER
CH), then press OK/STATUS.
• For example, for local channel number 9,
press 0, 9.
Always enter “0” for empty digits.
4 Repeat the above procedures until
you set the guide channel for all the
receivable local channels.
3Finish Setting
Press MENU.
To correct a user channel number
and/or a guide channel number,
repeat the same procedures explained
above. This time, enter the correct user
channel number and/or the correct
guide channel number.
G-CODE/SHOWVIEW PROG.
CODE
END: TIMER
Timer Recording Using the G-G-
G-CODE System
By entering the G- CODE number for a
particular TV programme, you can
easily programme a timer recording.
G-CODE
Guide Channel No.
(GUIDE CH)
ABC2 Ch 2 Ch 2
ATN7 Ch 7 Ch 7
TCN9 Ch 9 Ch 9
TEN10 Ch 10 Ch 10
SBS28 Ch 28 Ch 28
Local TV Station’s
Name
Local Channel No.
(USER CH)
G-CODE
Guide Channel No.
(GUIDE CH)
Local TV Station’s
Name
Local Channel No.
(USER CH)
SET CLOCK
GUIDE CHANNEL SET UP
SELECT: CONFIRM: OK
END: MENU
GUIDE CHANNEL SET UP
GUIDE CH USER CH
254 --
255 --
01 05
02 02
03 03
SELECT: OR 0-9
CONFIRM: OK
END: MENU
G-CODE/SHOWVIEW PROG.
CODE 123
CONFIRM: OK
CORRECT: CLEAR
END: TIMER
vr1010/75 00.6.29, 4:54 PM24