User Guide
— 21 —
.....
One Touch Recording (OTR)
The OTR function lets you quickly
specify how long you want a recording
to continue. You do not have to
programme the timer.
1On TV
1 Turn on the TV.
2 Select the video channel (or external
video input).
2On VCR
Insert a cassette with the record tab in
place.
The VCR turns on.
• If a cassette is already in the VCR, turn
on the VCR.
3Select Channel
Press CH / or Number buttons to
select the channel to record.
4Start OTR
Press REC/OTR a twice.
Recording starts immediately, and the
(Record) indicator lights up on the
display.
This indicates that the
VCR will
automatically shut off
after 30 minutes of
recording.
5Select Recording Length
Press REC/OTR a repeatedly until the
desired recording length appears.
Each time you press the button,
recording length increases in 30-minute
intervals.
Using On-Screen Display
You can display the VCR operating
status on the TV screen.
For the information about what you can
see on the TV screen, see page 9.
1Select VCR Set Up Mode
1 Press VCR.
2 Press MENU.
3 Press PLAY or
STOP to select
“VCR SET UP”
then press OK/STATUS.
The VCR Set Up menu appears.
2Select On-Screen Mode
1 Press PLAY or STOP to select
“ON SCREEN MODE.”
2 Press FF .
Each time you press the button, the
setting changes.
ON:
When you press a tape running
button (Stop, Play, etc.), the VCR
status appears for 5 seconds.
COUNTER:
When you press a tape running
button, the VCR operating status
appears for 5 seconds.
After 5 seconds, the VCR status
disappears except the time counter.
OFF:
The VCR operating status does not
appear even if you press a tape
running button.
3Finish Setting
Press MENU.
To display the VCR status on the TV
screen manually, press OK/STATUS.
The VCR status appears for about 5
seconds.
• If “ON SCREEN MODE” is set to OFF,”
no VCR status appears though you press
OK/STATUS.
REC (Normal recording)
To check time remaining
during an OTR
Press OK/STATUS.
To change the recording
length during an OTR
Press REC/OTR a until the desired
length appears.
To cancel an OTR
Press STOP to stop recording before
the preset recording length is reached.
If you want to cancel the OTR mode
but continue recording, press REC/
OTR several times until “OTR”
changes to “REC” on the TV screen.
Notes on the indications on the display
while an OTR operation
• During recording, the displayed time
counts down. When “0:00” is reached,
recording stops and the VCR turns off
automatically.
• If an OTR is engaged during pause, the
displayed time counts down normally but
recording does not begin until you cancel
the pause.
0:30 1:00 1:30 5:30 6:00
OTR(0:30)
CH12
SP
DSPC ON
ON SCREEN MODE ON
TIMER REC SPEED MANUAL
AUDIO OUT HIFI
AUTO SAT
RECORD LINK OFF
S-VHS MODE ON
SELECT:
CHANGE:
END: MENU
vr1010/75 00.6.29, 4:54 PM21