User Guide

— 38 —
General
Mains voltage AC 220 – 240V (AUTO)
Mains frequency 50/60Hz
Power consumption
Power ON Approx. 24 W
Power OFF Approx. 5.5 W
Power Save Mode Approx. 3 W
Ambient temperature +5°C to +40°C
Relative humidity 10% to 80%
Dimensions Approx. 435(W) x 94(H) x 343(D) mm
Mass Approx. 4.8kg
Position for use Horizontal
Video output channel UHF E36 (adjustable between 22 — 69)
Possible number of TV channel 99
Number of pre-programmable memory blocks 8
Number of days in advance 365 or every day, or every week
Tuner
Aerial input PAL I
VHF L: 47 — 89 MHz
VHF H: 104 — 300 MHz
302 — 470 MHz
UHF: 470 — 862 MHz
CATV
Video
Input (VIDEO IN) 0.5 to 2.0 Vp-p, 75 ohms
Output (VIDEO OUT) 1.0±0.2 Vp-p, 75 ohms
Resolution 250 lines (VHS)
400 lines (S-VHS)
Signal/noise ratio Better than 45 dB
Audio
Input (AUDIO IN) –8 dBs, 50k ohms (0dBs=0.775 Vrms) – for RCA connector
–8 dBs, 10k ohms (0dBs=0.775 Vrms) – for SCART connector
Output (AUDIO OUT) –8 dBs, 1k ohms (0dBs=0.775 Vrms)
Accessories supplied Remote control unit
RF coaxial cable
Batteries – R6(SUM-3)/AA (only for checking operations)
S PECIFICATIONS
Design and specifications are subject to change without notice.
Correction
• Insert the cassette with the window side up and the record
tab facing you.
• Check that a cassette tape is not already inserted. Press
EJECT .
• Make sure the AC power cord is correctly connected to
an AC outlet.
• If the
(Timer) indicator is lit on the display, press
VCR POWER or STANDBY/ON to cancel timer
recording, then press EJECT .
• Make sure the record tab on the back of the cassette is not
removed. (✈P.22)
Miscellaneous
A cassette cannot be inserted.
The cassette does not eject.
The cassette ejects when you press RECORD, or when
you press VCR POWER or STANDBY/ON to set timer
recording.
B EFORE R EQUESTING S ERVICE (CONTINUED)
VR1000/07-New 99.7.8, 3:34 PM38