User Guide

ManualsBrandsPhilips ManualsVCRVR1000

— 36 —

PERATING

For operating TV

Note:

Though this remote control can operate most

of the PHILIPS TVs as well as many other

manufacturers', some of the TVs will not

operate or some functions available on the

TVs will not work with this remote control.

1Set Code

1 Press and hold TV POWER.

2 Press two Number buttons for the

manufacturer’s code number of your

TV, referring to the table to the right.

• For example, for 02, press 0 then

• The remote control can now operate

the TV of the selected code.

2Confirm Setting

Press TV POWER, pointing the

remote control at the TV.

If the TV turns on or off, your setting is

completed.

If not, repeat steps above, using another

code.

After replacing the batteries

You need to reset the manufacturer’s code

again.

Note:

The buttons you can use to operate your TV

are explained on page 6.

You can use this remote control to operate your TV. To use this remote control for operating the TV, you first need to set the

manufacturer's code properly.

You first need to set the manufacturer’s code.

TV Manufacturers’ Codes

PHILIPS 01, 02, 03

EMERSON 14

GOLDSTAR 04

GRUNDIG 24, 25

HITACHI 12

JVC 05

MITSUBISHI 13, 26

PANASONIC 07, 17, 19, 20

RCA 10

SAMSUNG 18

SANYO 11

SHARP 16

SONY 09

THOMSON 21, 22, 23

TOSHIBA 08

ZENITH 06, 15

VR1000/07-New 99.7.8, 3:34 PM36