User Guide

— 16 —
S ETTING U P (CONTINUED)
Manual Channel Setting
When you want to do channel setting
manually, perform the following
procedures as required.
• If you want to ..........
.......... add channels (See below)
.......... delete unwanted channels
(See next column)
.......... change the channel
positions (See next
column)
.......... perform fine-tuning (See
page 17)
.......... descramble programmes
when receiving scrambled
broadcasts (See page 17)
.......... change station names (See
page 17)
If you want to add channels
1
Access Programmed Channel
Information List
1 Press MENU.
2 Press or to select “MANUAL
CH SET”, then press OK or 4.
2Select Channel Position
1 Press until a vacant
position in which you want to store a
channel begins blinking.
2 Press OK. The Manual Channel Set
screen appears.
The blueback screen and the
programme currently being
broadcasted by the selected channel
appear alternately for 8 seconds each.
PR CH ID PR CH ID
01 26 BBC1 08 ––––
02 33 BBC2 09 ––––
03 23 ITV 10 ––––
04 30 CH4 11 ––––
05 37 CH5 12 ––––
06 –––– 13 ––––
07 –––– 14 ––––
[
]
: EDIT
[CLEAR] : DELETE
[MENU] : EXIT
If you want to delete
unwanted channels
You can delete channels manually.
1 Press MENU.
2 Press or to select “MANUAL
CH SET” then press OK or .
The programmed channel informa-
tion list appears.
3 Press or until the item you want
to delete begins blinking.
4 Press CLEAR to delete.
The item directly beneath the
cancelled one moves up one line.
5 Press MENU to exit from the menu
operations.
If you want to change the
channel positions
You can also replace the channel
position numbers.
1 Press MENU.
2 Press or to select “MANUAL
CH SET” then press OK or .
3 Press or until the item you want
to change begins blinking, then press
OK.
4 Press or to move the station to
the new channel position then press
OK.
Example: If you moved the station in
position 4 to position 2, the stations
originally in positions 2 and 3 each
move down one space.
5 Press MENU to exit from the menu
operations.
3Set New Channel Information
1 Press or to change the band
between CH (regular) and CC
(cable), then press .
2 Press the Number buttons to input
the channel you want to store.
• Input “0” before any single number
entries.
• To input the registered station name
(ID – ✈P.18), press until “----”
(ID setting) begins blinking, then
press or .
• For fine tuning adjustment, press
until “+/–” begins blinking, then
press or . While tuning, “+” or
“–” appears.
• When storing a channel that sends
scrambled broadcasts, press until
“OFF” (Decoder setting) blinks,
then press or to set DE-
CODER” to “ON” (“OFF” is the
default setting).
When “AV2 SELECT” is set to
“AV2” or “SAT”, the “DECODER”
setting cannot be changed (✈P.27).
The blueback screen and the
programme currently being broadcast-
ed by the selected channel appear
alternately for 8 seconds each.
PR CH ID FINE DECODER
06 CH01
– – – – +/– OFF
[
] : SELECT
[ ] : CURSOR
: OK
[MENU] : EXIT
VR1000/07-New 99.7.8, 3:30 PM16