User Guide
— 15 —
Power Save Mode
You can reduce the power consumption
while the VCR is turned off.
1Select Mode Set Screen
1 Press MENU.
2 Press or to select “MODE
SET” then press OK or 4.
2Set Power Save Mode
Press or to select “POWER
SAVE” then press OK or 4 to set to
“ON”.
3Finish Setting
Press MENU.
• During Power Save, the display window
will be turned off.
• The Just Clock function (
✈
P. 20) does not
work while the Power Save mode is
engaged.
• While the VCR is in the Power Save mode,
the picture may be distorted momentarily
when you turn on/off the VCR.
• Power Save does not work when ...
... the VCR is in the Timer mode.
... the VCR's power is turned off after
timer-recording (or One Touch
Recording).
... the Auto Satellite Prog Recording mode
is engaged (
✈
P. 28).
... “AV2 SELECT” is set to “DECODER”
or “SAT” (
✈
P. 27).
Preset Download
When you want to perform Preset
Download after setting channels,
perform the following procedure.
For the detail of Preset Download, see
page 11-13.
1Perform Preset Download
1 Press MENU.
2 Press or to select “AUTO CH
SET”, then press OK or 4.
3 Press or to select “FOLLOW
TV”, then press OK or 4. The
Follow TV screen appears and then
Guide Prog. Set screen appears.
MODE SET
DSPC ON
O. S. D. ON
DIRECT RECORD ON
AUTO SP LP TIMER OFF
DIGITAL 3R ON
POWER SAVE OFF
S-VHS AUTO
NEXT PAGE
[ ]
[MENU] : EXIT
PR: channel positions
CH: channel numbers
ID: station names (✈P.18)
• The blueback screen and the programme
currently being broadcasted by the blinking
station appear alternately for 8 seconds each.
• To view the next page, use the button
on the remote control.
The stations located in the selected country
appear at the top of the list.
• The Guide Programme numbers will also be set
automatically.
3Finish Setting
Press MENU to exit the menu opera-
tions.
Auto Channel Setting
If you move to another place, you may
need to tune the VCR tuner again for
your new residential area.
1Perform Auto Channel Set
1 Press MENU.
2 Press or to select “AUTO CH
SET”, then press OK or 4.
3 Press or to select “AUTO SET”,
then press OK or 4. The Auto Set
screen appears as below;
2
Confirm Programmed Channel
Information List
Once it is completed, “COMPLETED”
is displayed on the screen for about 5
seconds.
The following screen will appear after
5 seconds, or if you press MENU;
PR CH ID PR CH ID
01 26 BBC1 08 ––––
02 33 BBC2 09 ––––
03 23 ITV 10 ––––
04 30 CH4 11 ––––
05 37 CH5 12 ––––
06 –––– 13 ––––
07 –––– 14 ––––
[
]
: EDIT
[CLEAR] : DELETE
[MENU] : EXIT
The Auto Set screen appears, and
remains on screen while the VCR
searches for receivable stations.
As Auto Channel Set progresses,
the “
” mark on the screen moves
from left to right.
Wait until the screen as shown in step 2
appears.
2
Confirm Programmed Channel
Information List
Once it is completed, “SCAN COM-
PLETED” is displayed on the screen
for about 5 seconds.
The following screen will appear after
5 seconds, or if you press MENU;
C: Cable
PR: channel positions
CH: channel numbers
ID: station names (✈P.18)
• The blueback screen and the programme
currently being broadcasted by the blinking
station
apppear alternately for 8 seconds each.
• To view the next page, use the button
on the remote control.
The stations located in the selected country
appear at the top of the list.
• The Guide Program numbers will also be set
automatically during Auto Channel Set.
3Finish Setting
Press MENU to exit the menu opera-
tions.
Notes:
• If you perform Auto Channel Set when the
aerial cable is not connected properly,
“SCAN COMPLETED -NO SIGNAL-”
appears on the screen in step 2. When this
happens, make sure of the aerial
connection and press OK; Auto Channel
Set will take place again.
• Depending on reception conditions, the
stations may not be stored in order, and
the station names may not be stored
correctly.
AUTO SET
PLEASE WAIT
0–––––+––––
■
––––+–––––+
[MENU] : EXIT
Beginning
End
PR CH ID PR CH ID
01 26 BBC1 08 ––––
02 33 BBC2 09 ––––
03 23 ITV 10 ––––
04 30 CH4 11 ––––
05 37 CH5 12 ––––
06 –––– 13 ––––
07 –––– 14 ––––
[
]
: EDIT
[CLEAR] : DELETE
[MENU] : EXIT
VR1000/07-New 99.7.8, 8:01 PM15